Справочник Пользователя для Vivitek DU6675

DU6675 DLP Projector - User's Manual

29

There are three Lamp power mode options, Normal, Eco and Custom Lamp Power. The 

Normal mode is used for every-day standard projection, whereas the Eco mode is used for 

saving power and lamp life. Custom Lamp power can be used for fine tuning the brightness 

of the projector. To change the Lamp Mode, refer to the following guides.

1.  Press MENU on the projector's OSD 

control panel or on the remote control 

to display the main menu. Use ◄or► 

to select SETUP menu.

2.  Use ▲or▼ to select Lamp power and 

◄or► to set to Normal, Eco mode or 

Custom Power Level.

When the projector is in Eco mode, brightness may be affected.

• Normal Mode: 100% Brightness

• Eco Mode: approx. 80% Brightness

• Custom Power Level: The adjustable range is 100% to 82%(24 steps); this option allows you to adjust 

lamp power by step.

The projected image can be frozen for short periods of time by using the remote control. 

This feature is useful for capturing still images from movies or freezing an animation at a 

particular point. To freeze the projected image, refer to the following guide.

1.  Press the FREEZE button on the 

remote control once to freeze the 

projected image.

2.  Resume the projected image, press the 

FREEZE button once more.

This feature allows you to temporarily stop 

projection, the projected image is blanked 

once BLANK button on the remote control 

is pressed, press once again to resume the 

projection.