Справочник Пользователя для JVC SP-PWR1

Masterpage:Right+

Filename [TH-R1R3EU_05Name.fm]

Page 14Monday, 28 March 2005  21:23

●

When you connect speakers other than the supplied ones, use 
speakers of the same speaker impedance (SPEAKER 
IMPEDANCE) indicated near the speaker terminals on the rear of 
the powered subwoofer.

●

DO NOT connect more than one speaker to one speaker 
terminal.

●

When moving the speakers, do not pull the speaker cords; 
otherwise, the speakers may fall over, causing damage or injury.

●

Do not reproduce sounds at so high a volume that they are 
distorted; otherwise, the speakers may be damaged by internal 
heat build-up.

●

When holding a speaker, always grasp the lower portion. (TH-R3)

●

Do not lean against the speakers, as the speakers could fall 
down or break, possibly causing an injury. Especially make sure 
that children do not lean against them. (TH-R3)

Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.

Front speakers
SP-THS55F

Powered subwoofer SP-PWR1

Centre speaker SP-THS55C

Surround speakers
SP-THS55S

●

Connect the black cords to the black (G) terminals.

●

Connect the white cords to the (F) terminals
referring to the table below:

FRONT SPEAKERS (LEFT)

White

FRONT SPEAKERS (RIGHT)

Red

CENTRE SPEAKER

Green

SURROUND SPEAKERS (LEFT)

Blue

SURROUND SPEAKERS (RIGHT)

Grey

Speaker cord

Centre speaker 
SP-THS66C

Surround speakers
SP-THS66S

Front speakers
SP-THS66F

Powered subwoofer 
SP-PWR3

White

Black

Black

Red

4 m

10 m

The satellite speakers are equipped with their speaker cords attached directly to their speaker unit instead of 
having speaker terminals on their cabinet.

4 m

10 m

4 m

4 m

TH-R1R3EU_00.book  Page 14  Monday, March 28, 2005  9:23 PM