Справочник Пользователя для JVC SP-PWR1

Page 41Monday, 28 March 2005  21:23

Filename [TH-R1R3EU_06DVD Operation.fm]

Masterpage:Left+

To record the entire programme, the unit automatically sets the 
appropriate recording mode depending on the combination of the 
total time of the programme to be recorded and either the 
remaining disc space or the specified recording time (from 
60 minutes to 480 minutes when using 4.7 GB blank media disc).

8 To record the entire programme within the actual 

Select 

AFR (JUST)B in a recording mode selection procedure.

●

Note that this function is available only for timer programming 
recording (A pg. 49, 50).

8 To record the entire programme by specifying the desired 

Select 

AFR60-FR360B, AFR420B or AFR480B in a recording mode 

selection procedure. (A pg. 39)

8 To record a 25 min. long daily programme five times just 

Perform 

B (A pg. 49) procedure. 

Be sure to set the recording mode to 

AFR125B and set Weekly/

Daily Rec Function to 

AMON-FRIB in step 8 to fit the total recording 

time to the whole disc space.

When the same programme is recorded in SP mode instead of in 
AFR125B, the 5th programme cannot be recorded.

●

You can programme this unit to timer record, regardless of the 
disc remaining time. When the disc remaining time is not enough, 
it is not possible to record until the end of the timer programme. 
Check the disc remaining time before performing timer 
programming.
(Example) If you programmed to timer-record for 60 minutes in 
SP mode on a 120 minutes disc, the disc remaining time would 
be 30 minutes in XP mode, 60 minutes in SP mode, 120 minutes 
in LP mode, 180 minutes in EP mode, and 240 minutes in FR480 
mode. Timer recording will not complete beyond these remaining 
times.

●

The maximum recording time of FR (JUST) mode is the same as 
the recording time of FR480 mode. When timer programming a 
long programme in FR (JUST) mode on a disc whose remaining 
time is short, it is recommended to check the disc remaining time 
in FR480 mode to see if the remaining time is enough for the 
programme.

●

Even if more than one programme are timer programmed in FR 
(JUST) mode, only the first one is recorded.

●

In order to ensure that the recording fits on the disc, this feature 
may leave a slight non-recorded section at the end of the disc.

●

There may be some noise and sound disturbance at the point on 
the disc where the unit switches the mode.

Your unit is equipped with a Sound-Multiplex decoder (A2) and a 
Digital stereo sound decoder (NICAM) making reception of stereo 
and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being 
received will be displayed on the TV screen for a few seconds.

●

ASUPERIMPOSEB must be set to AAUTOB. Otherwise the on-
screen displays will not appear. (A pg. 75)

●

If the quality of stereo sound being received is poor, the 
broadcast might be received in monaural with better quality.

When a programme is recorded on a DVD-RAM or DVD-RW disc 
in VR mode, all audio channels of the receiving programme are 
recorded on the disc. When recording onto a DVD-R or DVD-RW 
(Video mode) disc, it is not possible to switch the audio channel of 
an external input using this unit. You can either switch the audio 
channel using the external device or remove the disc and press 
AUDIO to switch the audio channel.

NOTE:
Before playing back a programme recorded in stereo, or a bilingual 
programme, refer to 

Blank

A: 1st
B: 2nd
C: 3rd
D: 4th
E: 5th

A: 1st
B: 2nd
C: 3rd
D: 4th
E: Blank (20 min.)

Blank

A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural

TH-R1R3EU_00.book  Page 41  Monday, March 28, 2005  9:23 PM