Справочник Пользователя для JVC SP-PWR1

Скачать
Страница из 100
Filename [TH-R1R3EU_09Editing.fm]
Masterpage:Left0
Page 65March 28, 2005 9:23 pm
65
EDITING
You can dub programmes from a camcorder or DV equipment 
connected to the unit with a DV cable. The unit’s remote control 
allows you the limited control of the connected camcorder or DV 
equipment functions during dubbing.
The following on-screen display for DV dubbing appears when 
ON SCREEN is pressed while the channel has been set to 
DV dubbing controller
If this mark is not displayed, check whether the DV equipment 
has been connected to the unit.
Auto capture button
Select to start or pause the dubbing. If ENTER is pressed when 
the DV device is in the pause condition, preroll editing* where it 
is possible to dub with a start time that is highly accurate will be 
activated. When the DV device cannot be operated from the unit 
(such as in camera mode), proceed with normal recording 
(A pg. 39).
* Preroll editing refers to the playback after the DV tape is slightly 
rewind. (For DV devices that do not support the –1x speed, the 
rewinding time may be longer.)
Sound monitor switch
For selecting the desired sound format for dubbing.
1
Connect a camcorder or DV equipment to the [DV IN] connector 
on the unit’s front panel.
2
The on-screen display for DV dubbing appears.
3
Press REC MODE repeatedly to set the recording mode.
4
Locate the point from where you want to start dubbing, then 
stop or pause playback by pressing the following buttons on the 
remote control:
To play back in slow speed (1/10 of the normal speed), press 
W 
to pause playback, then press 
To play back frame-by-frame, press 
W to pause playback, then 
W repeatedly. Each press of W advances a frame.
To change the playback direction, press 
5
Press 
, then press ENTER. Press 
F or G to select the desired sound track from the pull-down 
menu, then press ENTER.
:
Select this to record the original stereo sound played back on 
the connected DV equipment.
:
Select this to record the dubbed stereo sound played back on 
the connected DV equipment.
Select this to record the sound of both 
B.
Note that this selection is not available when the source 
programme is recorded in 16BIT (48 kHz) mode.
6
Press selection keys to select 
, then press ENTER
The dubbing starts.
Playback on the external DV equipment and recording on the 
unit should start simultaneously.
To pause dubbing, press selection keys to select 
then press ENTER. Both the unit and the external DV 
equipment pause dubbing.
To resume dubbing, press selection keys to select 
then press ENTER to start dubbing.
7
Press 
to stop dubbing.
Both the unit and the external DV equipment stop dubbing.
Dubbing copyright guarded programmes is not possible.
Original DV information such as the recording date and time are 
not recorded.
The superimposed indication during the operation or dubbing is 
not recorded.
cannot switch channels.
DV Dubbing
Use the DV cable VC-VDV 204U for connection.
When you connect a PC to the [DV IN] connector, we do not 
assure the normal operation of this unit.
DV cable
(VC-VDV 204U)
(not supplied)
Camcorder
DV connector
Your unit
DV equipment
DV
1 2
A
B
C
DV
AUDIO 1
DV DUBBING
TH-R1R3EU_00.book  Page 65  Monday, March 28, 2005  9:23 PM