Manualsbrain.com
  1. Инструкции и руководства
  2. Бренды
  3. JVC
  4. SP-PWR1
  5. Справочник Пользователя

Справочник Пользователя для JVC SP-PWR1

Скачать
Страница из 100
Masterpage:Right+
Filename [TH-R1R3EU_09Editing.fm]
Page 70March 28, 2005 9:23 pm
EDITING
70
NOTE:
Digital audio from [L-1/L-2 DIGITAL INPUT (COAXIAL/OPTICAL)] 
cannot be recorded. Use the analogue audio input from the 21-pin 
SCART connectors during recording.
L-2 Select Setting
Set 
AL-2 SELECTB to the appropriate mode depending on the type 
of appliance connected to the unit’s [L-2 INPUT/DECODER] 
connector.
1
Perform steps 1 and 2 of 
2
Press selection keys to select 
ENTER for confirmation.
3
Press selection keys 
to select the 
appropriate setting, 
then press ENTER.
4
Press SET UP to 
complete the setting.
* The boldface settings below indicate the settings at your purchase.
8
 / 
Select 
AVIDEO/RGBB or AS-VIDEO/RGBB to use this unit as the 
recording deck with the player connected to the [L-2 INPUT/
DECODER] connector, or to use the satellite receiver connected to 
the [L-2 INPUT/DECODER] connector.
If a connected appliance’s output is compatible with regular 
video signals, set to 
:
If a connected appliance’s output is compatible with Y/C 
signals, set to 
AS-VIDEO/RGBB. You can obtain a high-quality 
picture. (For connection, be sure to use a 21-pin SCART cable 
that is compatible with the Y/C signal.)
Select 
satellite programme with the TV set while the unit is turned off.
If a connected satellite receiver’s output is compatible with 
regular video signals, set to 
:
If a connected satellite receiver’s output is compatible with Y/C 
signals, set to 
ASAT S-VIDEO/RGBB. You can obtain a high-
quality S-VHS picture. (For connection, be sure to use a 21-pin 
SCART cable that is compatible with the Y/C signal.)
:
To use a decoder connected to the [L-2 INPUT/DECODER] 
connector.
●
When RGB signals are output from the connected appliance 
such as a satellite receiver, the unit will record in RGB signals 
except when 
●
If you have a satellite receiver or a decoder connected to the [L-2 
INPUT/DECODER] connector, be sure to set 
AL-2 SELECTB back 
to appropriate mode after editing.
●
When you want to play back and record RGB picture, connect the 
satellite receiver’s RGB compatible output connector to the unit’s 
input connector.
●
If you are not connecting a satellite receiver or a decoder to the 
[L-2 INPUT/DECODER] connector, leave 
●
When 
B, ASATB appears on the TV screen or front display 
●
set 
●
AL-1 OUTPUTB is set to ASCART RGBB, it is not possible to set 
●
●
In order to set 
F-1 Input Setting
AF-1 INPUTB to the appropriate mode depending on the 
connector ([VIDEO] or [S-VIDEO]) being used on the front panel.
1
Perform steps 1 and 2 of 
2
Press selection keys to select 
ENTER for confirmation.
3
Press selection keys 
to select the 
appropriate setting, 
then press ENTER.
4
Press SET UP to 
complete the setting.
* The boldface settings below indicate the settings at your purchase.
8
 / S-VIDEO
:
When connecting an appliance to the [VIDEO] input connector, 
set to 
When connecting an appliance to the [S-VIDEO] input 
connector, set to 
.
B, APOLSKAB or AOTHER EASTERNB for the country 
ADECODERB will not appear as a selectable 
item for 
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
VIDEO IN/OUT
RECORDING SET
OTHERS
SELECT WITH [CURSORS] 
THEN PRESS [ENTER]
MONITOR TYPE
F-1 INPUT
L-1 INPUT
DISPLAY SET
L-1 OUTPUT
L-2 SELECT
4:3LB
VIDEO
VIDEO
SCART VIDEO
S-VIDEO
S-VIDEO/RGB
VIDEO/RGB
SAT S-VIDEO/RGB
EXIT
OK
SELECT
SET UP
DECODER
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
VIDEO IN/OUT
RECORDING SET
OTHERS
SELECT WITH [CURSORS] 
THEN PRESS [ENTER]
MONITOR TYPE
F-1 INPUT
L-1 INPUT
DISPLAY SET
L-1 OUTPUT
L-2 SELECT
4:3LB
VIDEO
VIDEO
SCART VIDEO
S-VIDEO/RGB
S-VIDEO
VIDEO
EXIT
OK
SELECT
SET UP
TH-R1R3EU_00.book  Page 70  Monday, March 28, 2005  9:23 PM