Справочник Пользователя для JVC SP-PWR1

Page 75Monday, 28 March 2005  21:23

Filename [TH-R1R3EU_10Subsidiary.fm]

Masterpage:Left+

8

 OFF / 

When this function is set to 

AONB, the recording information is 

automatically stored in the library. For details, refer to 

8

 / LINEAR PCM

You can select the audio format when you record a title in XP 
mode. When this function is set to 

ALINEAR PCMB, you can obtain 

a high-quality audio sound.

To record in Dolby Digital format.

LINEAR PCM:

To record in Linear PCM format.

8

You can select the desired NICAM audio channel to be recorded 
on a DVD-R/RW (Video mode) disc.

:

To record the main language of NICAM audio.

To record the sub language of NICAM audio.

:

To record the standard (monaural) sound of NICAM audio.

NOTE:
This function works only for the NICAM bilingual programme.

8

When this function is set to 

AONB, you can easily start recording the 

programme that you are watching on your TV. While holding 

press 

I on the remote control, or press R on the unit.

●

When you use the Direct Rec function, be sure to use a TV 
offering T-V LINK, etc. and connect a fully-wired 21-pin SCART 
cable between the unit and the TV. (A pg. 11)

●

If 

ADIRECT RECB is set to AOFFB, the R button functions as 

described in 

●

During Direct Rec, 

A- -B appears on the front display panel.

●

If a programme is recorded with the Direct Rec, the station name 
will not be registered in the library. 

A- - - -B will be displayed for the 

station name.

8

You can play back PAL discs, or record PAL and SECAM signals on 
this unit. Select the appropriate colour system.

:

Normally select 

AAUTOB. AAUTOB identifies the input signal and 

automatically switches to an appropriate colour system. When 
AAUTOB is not selected, you have to switch the colour system to 
an appropriate setting (PAL or SECAM) manually.

To record PAL signals.

:

To record SECAM signals.

8

 

 OFF / 

When this function is set to 

AAUTOB, various operational indicators 

appear on the TV screen.

OFF:

To turn off superimposed indications.

:

To superimpose operational indications for approximately five 
seconds just after the corresponding operation.

●

Even when 

ASUPERIMPOSEB is set to AOFFB, you can display 

the various operational indicators by pressing ON SCREEN on 
the remote control. To clear the operational indicators, press 
ON SCREEN again.

●

When you use this unit as the source player for editing, be sure to 
set 

ASUPERIMPOSEB to AOFFB before starting. (A pg. 68)

●

When you select 

AAUTOB, during playback, the operation mode 

indicators may be disturbed depending on the type of disc being 
used.

8

 

:

Select this when you want to receive an unstable channel with 
poor signals.

:

When this function is set to 

AONB, the TV screen becomes all 

grey when receiving a channel not in use.

8

 / DIMMED1 / DIMMED2 / OFF

You can change the brightness of the front display panel.

Normally select this. To turn on the display and blue lamp of the 
front display panel.

To change the brightness level.

:

To turn off the display and blue lamp of the front display panel.

8

 

When this function is set to 

AONB, you can reduce the power 

consumption while the unit is turned off.

●

During Power Save mode ^
^ the front display panel will be turned off.

●

It takes some time for the unit to complete initialisation after you 
turn on the unit power, with 

AHELLOB blinking on the front display 

panel.

8

This unit offers you the choice to view on-screen messages in 
10 different languages. Although 

the language automatically, you can change the language setting 
manually as required. (A pg. 20)

●

For details, refer to 

TH-R1R3EU_00.book  Page 75  Monday, March 28, 2005  9:23 PM