Справочник Пользователя для Barco PGWU-62L-K

31

PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/07/27

Color Temp

Adjust the color temperature of the image.

Cool: Apply “Cool”  color temperature setting.

 

y

Bright: Apply “Bright” color temperature setting.

 

y

Warm: Apply “Warm” color temperature setting.

 

y

Warmest: Apply “Warmest” color temperature setting.

 

y

Input Balance

Adjust the gain and offset of the red, green, or blue channel of the image. This is similar to adjusting contrast, but 

only affects a single color channel.

Offset: Refer to the control of color imbalance in the darker areas of the projected image.

 

y

Gain: Refer to the control of color imbalance in the brighter areas of the projected image.

 

y

Press the ◄ to decrease the input balance.

 

y

Press the ► to increase the input balance.

 

y

Aspect Ratio

Adjust the aspect ratio of the image.

4:3: The input image is resized to a 4:3 aspect ratio.

 

y

16:10:The input image is resized to a 16:10 aspect ratio.

 

y

Native: the original aspect ratio of the source is kept and fit to screen. This is height or width whatever comes 

 

y

first.
Auto: Automatically selects the appropriate display format.

 

y

Timings

Adjust the horizontal position, phase or vertical position of the image.

Press the ◄ to decrease the horizontal position, phase or vertical position.

 

y

Press the ► to increase the horizontal position, phase or vertical position.

 

y

Adjust the black level or colorspace of the image.

Black Level NTSC: Set black level of NTSC.

 

y

Format: Select the colorspace format of the source. This depending per input source.

 

y

Aspect Ratio

Adjust the black level or colorspace of the image.

Black Level NTSC: Set black level of NTSC.

 

y

Format: Select the colorspace format of the source. This depending per input source.

 

y

Auto Image

Execute the auto image adjust.

Press EXECUTE to adjust the image size, phase and timing automatically.

 

y

Force the projector to reacquire and lock to the input signal. This is useful when signal quality is marginal. After 

 

y

executing this command, the projector will enter the search status. After the signal is reacquired, the image 

settings (H start, H phase, V start) will be optimized for the input signal.

Display Mode

Change the sequence and waveform of the image.

Bright: Default value. This preset provides maximum lumens output.

 

y

Presentation: This preset provides the best possible image for presentation and computer graphics.

 

y

Video: This preset provides the best possible image for video sources (DVD, TV, etc.)

 

y

DICOM: This preset provides the simulated DICOM.

 

y