Справочник Пользователя для Viper VE 17HDP-EU

 

 

8] Select either low speed {150 rpm} or high speed {300 rpm} by pushing the 

motor mounted switch (1) into the low or high position.(Only for VE17DS) 
*Never change the speed while operating the machine. Be sure the 

 
 
 

 

9] When the machine is in operation, both hands should be placed on the 

switch housing {upper handle}. 

10] During operation, to make the machine go right, gently raise the handle. To 

make the machine go left, gently lower the handle.   

11] To stop the machine at any time, simply release the operating trigger and the 

machine will stop automatically.   

 
12] Unplug machine as soon as you are not using it.   
13] Tilt machine back and remove pad driver or brush.   
14] Roll the power cord around the handle and the power cord hook. 
   

To keep the machine performing well for many years, please follow the following maintenance procedures. 

* Always confirm that the machine is unplugged prior to performing any maintenance or repairs. 
*Never store a low speed machine with the pad driver or brush mounted to the machine. 
1] Clean the outside of the machine with a mild cleaner. 
2] Check power cord for any damage. If damage is detected, replace power cord immediately.   
3] Lubricate wheels with a water resistant lubricant once a month. 
4] Check machine for loose or missing nuts and bolts, and replace as necessary. 
5] If the machine is used in a dusty environment, you may remove the motor cover and blow the motor, clean with 

compressed air. This will ensure proper ventilation, and allow the motor to run cooler. 

 
 
 

1] Unplug machine from power source. 
2] Store in upright position in a dry area. 
 

Do not dispose of electrical appliances as unsorted municipal waste, use separate 
collection facilities. 

 

 

 

 

 

 

 

 

 

 

 

 

 

VF72309

 (1)2009-12

 

 

1