Справочник Пользователя для Viper VE 17DSP-EU

 

 

 

For transport reasons the motor head and shaft are supplied not assembled. 

1] Insert the gear index housing (1) into the “U” shape bracket (2). 

 
 
 
 

2] Align the holes of the gear index housing and the “U” shape bracket. 
3]Insert the socket screws into the holes of the “U” shape bracket and then 

tighten the screws. 

 
 
4] Wind the power cord around the handle and the power cord hook. 

 

1] Place the handle in the upright position, Grasp the handle with both hands 

and tip the cleaner until it stands on the two wheels (1). 

2] Wheel the cleaner to where it is needed. 

 
 
 

 

1] Remove any obstructions or other obstacles in the area which is to be 

cleaned. 

2] Place the handle in the upright position and tilt machine back until handle 

rests on the floor. 

3] Attach the pad driver or brush to the machine by placing the clutch plate 

over the gearbox hub and turning the driver / brush 1/4 turn. 

4] Place machine back into its upright position. 
5] Plug power cord into a grounded outlet. 

*Never use an extension cord in conjunction with the standard power 

6] The handle height may be adjusted by pulling the adjustment lever (1) and 

lower the shaft (2) into its cleaning position. 

7] To start the machine, press the red safety button(3) on the top of the upper 

switch housing ,and then squeeze either of the operating triggers(4/5) the 
safety button (3) must be depressed prior to squeezing the operating 
triggers (4/5). 

 

 

 

 VF72309

 (1)2009-12            

 

 

1 

2 

1 

1

4 

2 

3 

5