Справочник Пользователя для Shark UV610

1. Before using, please ensure that the cordless sweeper has been initially  

charged for 16-20 hours
Your  cordless sweeper will only operate properly when the batteries are fully  
charged.  When fully charged your sweeper will operate for 35-45 minutes -
dependent upon the type of use (example - carpets or bare floors).

2. Push the On/Off switch to operate the unit. To turn off , press switch again.(Fig.4)

1. Pull the dust container straight out from the side. (Fig. 6)

Fig. 7

2. Empty dust container contents. (Fig. 7) If desired- you may rinse with water to

clean the dust container - but dry thoroughly before replacing on the sweeper.

Fig. 8

3. Replace dust container on cordless sweeper.

4. Periodically remove the transparent brush cover on the front of the cordless 

sweeper and remove any build up of lint, hair or fiber on the rotating brush. To         
remove the cover - grip the cover from the bottom, pull out and upward until  
the cover unlocks from the side slots and tabs located on the top of the 
sweeper. (Fig. 8) 

Fig. 8

Fig. 6

Fig. 7

“On/Off” switch

Fig. 4

area.

3. To release the handle to a comfortable position, apply pressure to the top of 

the sweeper head with your foot while pulling back on the handle.(Fig. 5)

 

Fig. 5