Справочник Пользователя для Shark EP604

3. Hold the HEPA-Type 

filter by the edges and 

vigorously “TapClean” 

the HEPA-Type filter 

on a hard, flat surface 

until no more dust is 

observed falling out 

from between the pleats of the filter. 

(Fig. 11)

4. The HEPA-Type filter may also be 

washed by running it under the tap 

allowing the water to run on the dirty 

side.  We recommend washing it  once a 

month or when suction appears 

reduced. Always allow 24 hours for air 

drying before replacing into the vacuum.

5. Reinstall the HEPA-Type filter into 

dust cup cover.

6. Replace the filter cover.

1. To remove the filter cover inside the 

dust cup cover, turn counter clockwise 

and lift. (Fig. 9)

Filter Cover

Dust Cup Cover

Fig. 9

HEPA-Type
Filter

Dust Cup 
Cover

Fig. 11

Fig. 10

2. To remove HEPA-Type filter, turn filter 

counter clockwise and then pull up. 

(Fig. 10)

Floor Brush

Release Button

When removing the unit from 

the box, please note that the 

handle storage clip is attached

to the handle when it is shipped.

(Fig. 1) Remove the handle 

storage clip and attach it to the 

back of the unit onto the clip 

mounting slot.

1.  Insert the handle into the hole above 

the dust cup handle. 

2.  Make sure that the slot in the handle 

fits correctly into the opening. (Fig. 2) 

3.  The metal pin should be on the same 

side as the handle release button. 

Depress the metal pin 

and then firmly push in 

the handle.

4. To remove the handle, 

press the handle 

release button and 

pull the handle up.

5. Attach the handle 

onto the handle 

storage clip if desired.

1.  Insert the floor brush into 

its location, in the direction 

of the arrow. (Fig. 3)

2.  To remove the floor 

brush from the vacuum, 

press on the floor brush 

release button and 

pull the floor 

brush out.

Metal Pin

Fig. 2

Fig. 3

Fig. 4

1. Remove the long end of the hose 

from hose holder.

2.  Attach the desired accessory to the 

hose. (Fig. 5)

NOTE: The provided accessories can 

only be used with the hose. Do not

attempt to attach to the base of the 

vacuum.

The dusting brush is used 

for the furniture, Venetian 

blinds, lamp shades, 

shelves, etc.

For radiators, crevices,

corners, baseboards and 

between cushions.

Fig. 5

3. To rewind the power cord, press the 

cord rewind button with one hand 
and guide the power cord with the 
other hand to ensure that it does not 
whip causing damage or injury. 

NOTE: Do Not use dust cup handle to 
transport the unit, always carry from the 
carry handle.

Fig. 1

Handle

Storage

Clip

1. Insert the power plug into the wall 

outlet.

2. Press the power On/Off button 

located on the unit to turn the 

vacuum cleaner “On”. (Fig. 4)

Always remove the power 

plug from the wall outlet before 

assembling or removing accessories.

Dust Cup 

Cover

Dust Cup

Container 

Closed

Opened

Always unplug the unit from 

electrical outlet before opening the dust 

cup (container).

Do NOT use the vacuum 

without the HEPA-Type filter in place.

After each Use - Always 

remove the HEPA-Type filter and the dust 

cup cover, then vigorously “TapClean” 

HEPA-Type filter until no more dust can 

be removed.

1. To remove the dust cup container, 

press on the dust cup retainer 

handle release button and lift the 

retainer handle upwards. (Fig. 6)

2. Grasp the dust cup from the top, tilt 

downwards and pull it out. (Fig. 7) 

Fig. 6

Fig. 7

3. To empty the dust cup (container), 

turn the dust cup cover clockwise. 

(Fig. 8)

4. Separate dust cup cover from dust cup 

(container).

5. Empty dust cup (container).

6. The dust cup (container) and dust cup 

cover can be wiped down with a damp 

cloth or rinsed under lukewarm tap 

water.

NOTE: Ensure that dust cup (container 

and dust cup cover are completely dry 

before re-installing into vacuum.

Fig. 8