Справочник Пользователя для Shark V1950

4. To change the speed of the brush roll, press the speed control button once.  One 

light “On” indicates the unit is on the optimal speed for cleaning hard floors.  Two 
lights “On” indicate the unit is on the optimal speed for cleaning carpets. (Fig. 10)

This feature protects your unit’s motor from damage due to overheating, that may be 
caused by the rotating brush getting jammed or tangled in something.  If the rotating 
brush becomes overloaded it will stop turning and both speed indicator lights will 
remain flash at the same time.  To reset the unit:
1. Press On/Off switch.
2. Remove the transparent brush cover from the sweeper power head to remove any 

build up of lint, hair or fiber on the rotating brushes. 

3. Wait for 10 seconds to allow the unit to cool down.
4. Press “On/Off switch again, the unit should restart.

3. To release the handle to a comfortable position, gently apply pressure to the top of 

the sweeper head with your foot while pulling back on the handle. (Fig. 9)

5. To sweep under furniture, press the handle release button and apply pressure in 

order to bend the sweeper’s handle forward.  The top forward folding pivot will 
release from the locked position for increased range of motion, allowing you to 
easily reach under sofas,  beds, and chairs.  (Fig.11)

To achieve the best performance, empty the dust container after each use.
1. Press the dust cup release lever with your foot. (Fig. 12) 

: Be careful not to accidentally turn the unit “On”

2. Lift out the dust container, which is connected to the handle.  Hold over a trash bin 

and push down on the no touch empty button located on the handle. (Fig. 13)

3.  To close the dust container press firmly on the bottom panel until it snaps back into 

place.  To replace the dust cup, position onto the sweeper power head and press 
down firmly until it snaps back into place.

4. Periodically remove the transparent brush cover on the front of the cordless 

sweeper and remove any build up of lint, hair or fiber on the rotating brush.  
To remove the cover - grip the cover from the bottom, pull out and upward until the 
cover unlocks from the side slots and tabs located on the top of the sweeper.  
Carefully cut away threads or hair with scissors. (Fig. 14)

exposed to areas of high heat or humidity. Do not store your cordless sweeper 
close to stoves, radiators, furnaces or in a bathroom or bathing area.