Справочник Пользователя для Shark MV3010-FS
11
www.sharkclean.com
STORAGE
1
Tilt the cleaning unit back to the upright
position.
2
Tap the foot pedal until the unit returns to
standby mode. The LED lights should be blinking
blue in a chasing manner. (Fig. 31)
blue in a chasing manner. (Fig. 31)
3
Unplug the unit.
4
Press your foot on the tail of the steam pad to
separate the steam pad from the steam nozzle
head by pulling up on the unit.
head by pulling up on the unit.
5
Wrap the cord around cord holders and secure
the plug. (Fig. 32)
6
Press the top “nozzle release” button and lift
the main body up and the steam nozzle will be
released. You may need to apply gentle pressure
to the steam nozzle head with your foot to
separate the two parts.
released. You may need to apply gentle pressure
to the steam nozzle head with your foot to
separate the two parts.
7
Remove the water tank cap and empty the water
tank.
8
Store the cleaning unit in an upright position.
The unit can be stored with a nozzle on it or
separately.
separately.
Steam Mode: Storage
Fig. 31
Fig. 32
CARE OF YOUR MULTI-PURPOSE
CLEANING PAD
CLEANING PAD
1
We recommend washing your cleaning pad
separately from other fabrics to avoid picking up
lint. Only use liquid detergent (no powder
detergent). Do not use any fabric softeners
or bleach. Line dry or dry on a low dryer
setting. (Fig. 33)
lint. Only use liquid detergent (no powder
detergent). Do not use any fabric softeners
or bleach. Line dry or dry on a low dryer
setting. (Fig. 33)
2
If there are loose threads on the cleaning pad
carefully cut the thread with scissors. Do not pull
on them or cut at the base. (Fig. 34)
on them or cut at the base. (Fig. 34)
IMPORTANT: The cleaning pad may be very
hot from the steam. Use caution when removing.
Let the unit cool for 2-3 minutes.
hot from the steam. Use caution when removing.
Let the unit cool for 2-3 minutes.
Fig. 33
Fig. 34
MV3010_40_ENG_IB_120713_2.indd 11
12-07-13 1:36 PM