Справочник Пользователя для Shark NH15

 1-800-798-7398

www.sharkclean.com

English

Check filters to see if they need cleaning. Follow instruc-

tions for rinsing and drying the 5 filters before re-inserting 

back into the Hand Vac. (See “Maintenance” sections for

instructions.)

Dust cup may be full; empty dust cup.

Check Hose and Hose connections for blockages; clear 

blockages if required.

If Dust Cup is empty, and attachment inlets are clear, check 

for other blockages. (See “Checking for Blockages” for  

instructions.)

Because the “multi-vac” suction is powerful, take care when

vacuuming scatter-type rugs or rugs with delicately  

sewn edges.

Check filters to see if they need cleaning. Follow 

instructions for rinsing and drying the 5 filters before re-

inserting back into the Hand Vac. (See “Maintenance”

sections for instructions.)

Dust cup may be full; empty dust cup.

Check Hose and Hose connections for suction strength; 

clear blockages if required.

If Dust Cup is empty, and attachment inlets are clear, check 

for other blockages. (See “Checking for Blockages” for

instructions.) 

To reset the Motor Thermostat:

1. Move the Power Button to the “O – Off” position.

2. Unplug the vacuum.

3. Check for clogged hose or filter; unclog hose and  

replace filter. 

Wait 45 minutes for vacuum to cool; then plug in the 

vacuum. Turn the Power Switch to the “I – On” position to

start the vacuum.

Note: if vacuum still does not start, contact Customer 

Service at: 

1-800-798-7398.

  Blockages may cause your vacuum to 

overheat and shut down.  To prevent 
this from happening, check potential 
blockage areas after heavy use or if  
you detect a loss of suction or poor 
cleaning performance.

 

DUST CUP – HAND VAC 
Dust cup may be full.  Empty dust 
cup. To empty Dust Cup:

Hold Hand Vac upright. Press Dust 
Cup Release Button to remove door.  
Lift door off hinges and set door 
aside.

Turn Dust Cup over a trash 
receptacle and tap gently to empty 
contents.

Hold Hand Vac upright once again.
Set bottom hinges of Dust Cup door 
into guides first; then snap door shut.

Check to make sure door is secure 
before turning on Hand Vac.

 

To order additional parts and accessories, go to: www.sharkclean.com or call 
1-800-798-7398. 

NOTE:  Some parts may be available at your Shark® retailer.

 

Filters require rinsing every 1 month 
for optimum performance. Follow 
instructions for rinsing and drying 
the 5 filters before using.  
(See “Maintenance” section)

 

Before continuing to vacuum, replace 
Filters in the Hand Vac :

•  Dust Cup End (Pre-Motor)

•  Exhaust End (Post-Motor)