Справочник Пользователя для Sony MZ-NH600
65
Troubleshooting and explanations
Troubleshooting
If a problem occurs during recorder operation, follow the steps described below before
consulting the nearest Sony dealer. If any messages appear, it is recommended to take
notes.
consulting the nearest Sony dealer. If any messages appear, it is recommended to take
notes.
1
Check to see if the problem is listed in, “Troubleshooting” (page 65).
Check “Messages” (page 74) for the problem as well.
2
If after step 1 you still cannot solve the problem, consult your nearest Sony dealer.
While recording
Symptom
Cause/Remedy
“NotENOUGH
POWER TO REC”
appears and recording
cannot be done on a
1GB Hi-MD disc.
POWER TO REC”
appears and recording
cannot be done on a
1GB Hi-MD disc.
• Recording is not possible when using a 1GB Hi-MD disc even
when the battery level indication shows enough power remaining
while the recorder is stopped or playing. This is because of a
mechanism that disables recording when the remaining battery
power is estimated by the recorder to be insufficient due to the high
power consumption required for 1GB Hi-MD disc recording.
, Insert a new alkaline dry battery or connect the AC power
while the recorder is stopped or playing. This is because of a
mechanism that disables recording when the remaining battery
power is estimated by the recorder to be insufficient due to the high
power consumption required for 1GB Hi-MD disc recording.
, Insert a new alkaline dry battery or connect the AC power
adaptor (not supplied) to the recorder.
The remaining
recording time appears
as “–0:00:00” and
recording cannot be
done, even though
2.0MB of free space is
displayed.
recording time appears
as “–0:00:00” and
recording cannot be
done, even though
2.0MB of free space is
displayed.
• This is a system limitation. 2.0MB is the capacity of the reserve
domain.
The recorder always
creates a new group
when recording.
creates a new group
when recording.
• The group recording (“
:REC”) is set to “
: REC On”. (You
cannot overwrite tracks.)
, Set the group recording setting to “
, Set the group recording setting to “
:REC Off” (page 30).
The first few seconds of
a track cannot be
recorded.
a track cannot be
recorded.
• If you start recording while the disc indication is rotating, data will
not be recorded to the first few seconds of the first track.
, Wait until the disc indication stops rotating before you start
, Wait until the disc indication stops rotating before you start
recording.
continued