Справочник Пользователя для Nilfisk-Advance America RS 501
ENGLISH
SERVICE MANUAL
98
33015500(3)2008-02
RS 501
OTHER SYSTEMS
DISASSEMBLY/ASSEMBLY OF SENSOR FOR ENGINE START-UP INHIBITION WHEN THE DRIVE
PEDAL IS PRESSED
PEDAL IS PRESSED
Disassembly
Engage the parking brake with the lever (66).
Turn the ignition key (76) to OFF position and remove it.
Cut the cable clamp (A) under the right side of the cab.
Disconnect the connector (B) of the sensor for engine start-up inhibition (C).
Remove the four mounting screws (D) of the drive pedal (E).
Slightly lift the drive pedal (E) and remove the mounting nut (F) of the sensor (C).
Remove the sensor (C), the harness (G) and the connector.
Turn the ignition key (76) to OFF position and remove it.
Cut the cable clamp (A) under the right side of the cab.
Disconnect the connector (B) of the sensor for engine start-up inhibition (C).
Remove the four mounting screws (D) of the drive pedal (E).
Slightly lift the drive pedal (E) and remove the mounting nut (F) of the sensor (C).
Remove the sensor (C), the harness (G) and the connector.
Assembly
Assemble the components in the reverse order of disassembly.
Adjust the sensor for engine start-up inhibition (see the procedure in the relevant paragraph).
Adjust the sensor for engine start-up inhibition (see the procedure in the relevant paragraph).
A
A
B
E
D
D
F
C
G
S301416
1.
2.
3.
4.
5.
6.
7.
2.
3.
4.
5.
6.
7.
8.
9.
9.