Справочник Пользователя для Samsung DJ68-00264B

If you have any questions or comments relating to Samsung products, 

please contact the SAMSUNG customer care center.

AUSTRALIA

1300 362 603

www.samsung.com/au

HONG KONG

3698-4698

www.samsung.com/sg

MALAYSIA

1800-88-9999

www.samsung.com/my

SINGAPORE

1800-SAMSUNG (7267864)

www.samsung.com/sg

Code No. DJ68-00264B (REV 0.1)

Check this list of possible problems and solutions before bring your vacuum to a service 

center

Trouble shooting

• Empty dust bin
• Review dust bin replacement
•  Replace HEPA filter
•  Ensure that dust bin assembly is positioned 

properly

•  Ensure that filter assembly is positioned 

properly.

• Clean pre-filter

Vacuum cleaner won’t turn on

Vacuum cleaner won’t pick up / loss of suction

dust escaping from the vacuum cleaner

• Not properly plugged into electrical outlet.
• Vacuum cleaner not turned on.
• No electricity in the electrical outlet.

• Circuit breaker tripped 
• Agitator brush rolls worn
• Dust bin full
• Incorrect carpet height setting
• Broken belt
• One or both filters are clogged

• Plug unit in firmly
• Press on/off button
• Check fuse or breaker

• Reset circuit breaker
• Replace brush rolls
• Dust bin release empty button to empty
• Set carpet height adjustment to appropriate
• Replace belt
• Remove, clean and replace filters

• Dust bin full
• Dust bin not installed
• HEPA filter clogged
• Dust bin not properly installed

• Filter assembly not assembled properly

• Pre-filter clogged