Справочник Пользователя для Windsor NW 10125330

86011370 NUWAVE 05/01/07

 

 
The secondary belt can be accessed from the under 
side of the machine. 
 
 

Unplug power cord. 

 

Adjust handle into the vertical position and lock 
the cam lever.  Tilt machine on it’s back using 
the handle to support it’s position.. 

 

Remove belt guard by loosening the (2) 
mounting screws. 

 

Loosen the 4 mounting bolts for brush motor 
assembly to relieve primary drive belt tension.  
Do not fully remove the (4) mounting bolts.  
Remove primary drive belt from the brush deck 
pulley. 

 

Remove brush deck assembly by loosening the 
4 mounting bolts that attach it to the linkage 
arms (2) bolts on the right side and (2) on the 
left side).  With the brush deck assembly 
removed, detach vacuum hose from the nozzle 
by loosening hose clamp. 

 

The secondary belt can now be accessed on the 
right side of brush deck assembly by removing 
the (4) screws that mount the drive housing 
cover/plate. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

Loosen nut on the belt tensioning bracket and 
remove damaged/broken belt.  Install new 
secondary belt in the same configuration. 

 

Apply tension to belt by pressing thumb tab on 
belt tensioning bracket.  Tighten the nut on belt 
tensioning bracket until proper tension is 
achieved.  Test belt by spinning brushes.  
Brushes should spin easily without excessive 
friction.   

 

Replace drive housing cover/plate, reattach the 
vacuum hose to nozzle, and reassemble brush 
deck to machine by using the (4) mounting bolts 
(2) on right side and (2) on left side. 

 

Reattach primary drive belt to brush deck pulley 
making sure the grooves line up properly.  Apply 
proper tension to primary drive belt and tighten 
the (4) mounting bolts on brush motor assembly.  
Reattach primary belt guard. 

 

Plug machine into a power supply and turn it on 
to assure the machine is running properly.