Справочник Пользователя для Samsung DJ68-00518A

 

Troubleshooting

Troubleshooting

Check whether the power

plug of the charger is plugged

correctly into the outlet.

If there are any obstacles within 

a range of about 1m in front of 

the charger and about 0.5m 

range to the left and right of the 

charger, you should remove the 

obstacles.

If there are any foreign 

substances on the change pin, 

wipe them off with a dry towel.

Is the Smart gate installed

near the charger?

Move the Smart gate to another

place so that the robotic 

vacuum cleaner can charge 

automatically.

Is the distance detection

sensor of the Smart gate facing

the charger?

Change the direction of the 

Smart gate or set the distance to 

an appropriate value.

Are the batteries of the Smart 

gate worn out?

Replace the batteries.

(2 type D (LR20) alkaline 

batteries)

Is the Smart gate set to Guard

(virtual door) mode?

Set the Smart gate to Fence 

(virtual wall) mode.

Is the Mode lamp turned off?

Check if the Smart gate is turned 

off and then set the Smart gate 

to a desired mode.

Are you using manganese drycell 
batteries?

Replace the batteries with new 
alkaline batteries.
(2 type D (LR20) alkaline
batteries)

Is the robotic vacuum cleaner 
forced to seperate from charger 
or pressed during charging?

When the robotic vacuum 
cleaner is seperated or pressed 
during the charging, after 
30-second counts it is returning 
to the charger for recharging 
automatically.

DJ68-00518A (EN-1)-0.1.indd   42

2009.11.5   11:35:37 AM