Справочник Пользователя для Emerson 5081-P
57
MODEL 5081-P pH/ORP
SECTION 5.0
OPERATION wITH REMOTE CONTROLLER
5.3 INFRARED REMOTE CONTROLLER (IRC) - KEy FUNCTIONS
The infrared remote controller is used to calibrate and program the transmitter and to read diagnostic messages.
See Figure 5-4 for a description of the function of the keys.
See Figure 5-4 for a description of the function of the keys.
Hold the IRC within 6 feet of the transmitter, and not more than 15 degrees from horizontal to the display window.
FIGURE 5-4. Infrared Remote Controller.
RESET - Press to end the current oper-
ation and return to the process display.
Changes will NOT be saved. RESET
does not return the transmitter to factory
default settings.
ation and return to the process display.
Changes will NOT be saved. RESET
does not return the transmitter to factory
default settings.
CAL - Press to access the calibrate
menu.*
menu.*
PROG - Press to access the program
menu.*
menu.*
DIAG - Press to view diagnostic mes-
sages.*
sages.*
HOLD - Press to access the prompt
that turns on or off the Hold function.
HOLd puts the transmitter in hold mode
and sets the output to a pre-pro-
grammed value. Press RESET to exit
hold mode.
that turns on or off the Hold function.
HOLd puts the transmitter in hold mode
and sets the output to a pre-pro-
grammed value. Press RESET to exit
hold mode.
Editing Keys - use the editing keys to
change the value of a flashing display.
The left and right arrow keys move the
cursor one digit at a time across a num-
ber. The up and down arrow keys
increase or decrease the value of the
selected digit. The up and down arrow
keys also scroll the display through the
items in a list.
change the value of a flashing display.
The left and right arrow keys move the
cursor one digit at a time across a num-
ber. The up and down arrow keys
increase or decrease the value of the
selected digit. The up and down arrow
keys also scroll the display through the
items in a list.
* Pressing CAL, PROG, or DIAG causes
the program screen to appear with the
selected menu (CALIBRATE, PROGRAM,
OR DIAGNOSE) showing. See Figure 5-3.
The first sub-menu (or the first diagnostic
message) also appears. Figure 5-5 shows
the complete menu tree.
ENTER - Press to advance from a sub-
menu to the first prompt under the sub-
menu. Pressing ENTER also stores the
selected item or value in memory and
advances to the next prompt.
menu to the first prompt under the sub-
menu. Pressing ENTER also stores the
selected item or value in memory and
advances to the next prompt.
NExT - Press to advance to the next
sub-menu.
sub-menu.
ExIT - Press to end the current opera-
tion. The transmitter returns to the first
prompt in the present sub-menu.
Changes will NOT be saved.
tion. The transmitter returns to the first
prompt in the present sub-menu.
Changes will NOT be saved.