Справочник Пользователя для Clarke 120V

WARNING: Improper discharge of waste water may damage the environment and be illegal.  The United

States Environmental Protection Agency has established certain regulations regarding dis-
charge of waste water.  Also, city and state regulation regarding this discharge may be in effect
in your area.  Understand and follow the regulations in your area.  Be aware of the environmental
hazards of chemicals that you dispose.

To prevent damage to the power cord, do not move this machine over the power cord,  instead,
lift the power cord over the machine. If the cord supplied is damaged, it must be replaced by
the manufacturer, its service agent or a similarly qualifed person in order to avoid the hazard.

To prevent damage to the power cord and hoses, do not use  the power cord or hoses to pull
the machine.

To prevent damage to the machine avoid extreme temperatures.

To prevent damage to the machine do not let pump run dry.

Part  Number

                04156A

       04157A / 04158A

       04147A / 04152A

                04148A

Solution  Tank

                      9 gallon rotationally molded

                    13 gallon rotationally molded

Solutin  Pump

                          100 psi demand pump

    150  psi  demand  pump

  300  psi  demand  pump

Vacuum Motor

                                     5.7", 3 stage

         (2) - 5.7" 2-stage

            7.2" 3-stage

Waterlift

                                           140"

                   150"

                   140"

Easy Circuit Locator                     N/A

              Standard

               Standard

               Standard

On-board  Heater

                    N/A

              Standard

               Standard

               Standard

Wand

                                                 Double bend twin nozzle polished stainless steel

Power  Cable

         25 ft. 12-3 hosp.

                                         (2) 25 ft. 12-3 hosp. grade plug

             grade plug

Wheels

                (2) 8" non-marking & (2) 3" casters

             (2) 10" non-marking & (2) 2" casters

Hose

                                          15 ft. crushproof vacuum and high pressure solution line

Low  Moisture  System                                                                                       Standard

Float Shut-Off

                                                                                      Standard

Weight

                  69 lbs.

                  75 lbs.

                  90 lbs.

                119 lbs.

Warranty

                         Product Lifetime (10 years) on tank and mainframe; 1 year Parts and labor

• The Model B

-100, 100H, 150H or 300HV is an extractor for cleaning carpet.  When used with a floor tool, the

machine applies cleaning solution to the carpet and removes the dirty solution and soil from the carpet.

• The extractor has controls to start the pump for the solution and the motor for the vacuum.  The floor tools have controls

to release the solution.

• The extractor has a bypass pump.  The pump runs when switched on, bypassing solution internally to keep pressure

even.The extractor starts when the solution lever on the floor tool is activated.

When using the extractor to clean carpets, follow this procedure:

1.

Do not walk on freshly cleaned carpets for at least four hours or until the carpet is dry to touch.

2.

Do not remove aluminum or plastic pieces that have been placed under the legs of furniture until
the carpet is dry.

3.

Do not allow children or pets to crawl or walk around on the damp carpet.

4.

Vacuum right after the carpet is dry and then vacuum the carpet once a week as needed.