Справочник Пользователя для Rheem Advantage Plus
•
95% efficient sealed-combustion design: Saves
hundreds, even thousands, of dollars in annual
operating costs.
hundreds, even thousands, of dollars in annual
operating costs.
•
No chimney required – Vents up to 40 feet using
3" Schedule 40 PVC, CPVC or ABS pipe.*
3" Schedule 40 PVC, CPVC or ABS pipe.*
* 100,000 and 130,000 BTU/hour models are certified to vent with 2˝ Schedule PVC,
CPVC or ABS Pipe.
•
Low-weight design: Rust-proof nonferrous outer jacket
and nonmetallic trim components make AdvantagePlus
much lighter and easier to maneuver than comparable
competitive models.
and nonmetallic trim components make AdvantagePlus
much lighter and easier to maneuver than comparable
competitive models.
•
Rugged and corrosion-resistant 316L stainless steel
tank ensures long life. No anode rod is needed.
tank ensures long life. No anode rod is needed.
•
High-efficiency 90/10 cupronickel heat exchanger
features the same highly durable, corrosion-resistant
material commonly used for boiler heat
exchangers.
features the same highly durable, corrosion-resistant
material commonly used for boiler heat
exchangers.
•
Whisper-quiet design: The burner and
blower assembly is located below eye
level and behind an enclosure made of
ABS plastic, resulting in an ultra-quiet
operation.
blower assembly is located below eye
level and behind an enclosure made of
ABS plastic, resulting in an ultra-quiet
operation.
•
Easy to service: All components and
controls are conveniently located
behind an easy-to-remove, front-
mounted access panel.
controls are conveniently located
behind an easy-to-remove, front-
mounted access panel.
•
Storage capacities from 45 to
119 gallons.
119 gallons.
•
Inputs from 100,000 to 199,000
BTU/hour.
BTU/hour.
•
Large volumes fast: 119-gallon,
199,000 BTU/hour model delivers
314 gallons of hot water in the first
hour, while needing only 31 minutes
to fully recover.
199,000 BTU/hour model delivers
314 gallons of hot water in the first
hour, while needing only 31 minutes
to fully recover.
•
Saves energy: No burning pilot light.
•
Meets low NOx requirements in
California (SCAQMD Rule 1146.2)
and Texas (TNRCC).
California (SCAQMD Rule 1146.2)
and Texas (TNRCC).
•
No chimney required: 85 equivalent
feet of vent length, using plastic pipe.
feet of vent length, using plastic pipe.
•
Self-diagnostic electronic control: Features digital
readout of water temperature set point and differential.
readout of water temperature set point and differential.
•
Minimizes heat loss: 2" polyurethane foam insulation
shrinks heat loss to less than 0.5° F per hour
(R-17 rating).
shrinks heat loss to less than 0.5° F per hour
(R-17 rating).
•
Wide temperature-setting range: 70°F to 160°F.
(180°F on booster models).
(180°F on booster models).
•
Zero clearance to any combustible surface.
•
Easy equipment servicing through highly accessible
front cover (24" service clearance recommended).
front cover (24" service clearance recommended).
Heat Exchanger /
Combustion Chamber
Combustion Chamber
Control Well and E.C.O.
Air Inlet Connector
Gas Valve
Combustion Blower
Gas Burner
Gas Inlet Nipple 1/2”
Hot Surface Ignitor
Flame Probe
Exhaust Outlet Connector
Control Board
Vent Over-Temp
Reset Switch
Reset Switch
Exhaust Elbow and Drain
Pressure Switch
Transformer
Condensate Connector Hose
Condensate Connector
AdvantagePlus
™
from Rheem-Ruud
The sealed-combustion gas fired water heater
line that’s perfect for commercial applications needing
line that’s perfect for commercial applications needing
LARGE VOLUMES
of
LOW-COST
hot water.
The ultimate
in heavy-duty
durability,
high-tech efficiency
and user-friendly
flexibility.