Справочник Пользователя для Rheem Water Heater

Скачать
Страница из 63
REGULAR CARE 
15 
FLUSHING THE SOLAR COLLECTORS 
It may be necessary to flush the solar collectors if there is sediment in the water 
supply. This should be conducted in the morning, within three hours of sunrise, 
when the water temperature inside the solar collector(s) is lower. 
 
• 
Open a hot water tap and allow the water to run for five (5) minutes prior to 
flushing the solar collector(s). 
• 
Close the hot tap. 
• 
Wait a further five (5) minutes before attempting to flush the solar collectors. 
This will assist in the transfer of any high temperature water in the solar 
collector(s) to the solar storage tank. 
 
 Warning: Exercise care, as water discharged from the solar collectors 
may be of a very high temperature. 
• 
To flush the solar collectors, follow the procedure 
 on page 9, allowing the water to flow from the bleed valve drain 
line for five (5) minutes before closing the bleed valve. 
 
It is recommended to flush the solar collectors every five (5) years. This will 
assist in keeping the solar collectors, solar cold pipe and solar hot pipe clear of 
sediment.