Справочник Пользователя для Rheem Universal Gas

• Insulation – sag and moisture proof fiberglass

insulation surrounds the storage tank to mini-
mize heat loss. In addition, heavy mineral wool
insulation surrounds the combustion chamber.

• Anode rods – patented design utilizes multiple

magnesium rods to ensure long life and corro-
sion resistance.

AGA/ASME rated and factory installed.

• Hand-hole cleanout – for removal of lime/sedi-

ment deposits.

• Manual reset high limit – all ASME models are

factory equipped with a manual reset high limit
to meet the code requirements of many states.

• Gas control system – Fully adjustable

thermostat from 100°F to 180°F, 24 volt
combination gas valve includes main gas
pressure regulation, On-Off manual valve,
120/24 volt transformer, and high limit
temperature cut-out.

• Stainless steel burners – Precision burners 

of raised port design are formed from high
chromium stainless steel. Entire burner
assembly is built like a drawer which slides 
out easily for quick inspection and simple
maintenance.

• LED dIagnostics – On damper assembly for

easier service.

Water heater(s) shall be 

UNIVERSAL

model ________________, manufactured by RHEEM-RUUD,

having gas input of __________ Btu/hr. and a recovery rate of _____________ GPH at a 100°F tem-
perature rise when tested and certified at ____________ thermal efficiency. Water heater(s) shall have
a storage capacity of _________ gallons. Water heater(s) shall have the CSA seal of certification and
supplied with a factory installed AGA/ASME rated temperature and pressure relief valve. Tank(s) shall
be furnished with a tube bundle having a double coating of high temperature porcelain enamel and fur-
nished with magnesium anode rods rigidly supported. Water heater(s) shall meet or exceed the thermal
efficiency and standby loss requirements of ASHRAE. Tanks shall have a working pressure rating of
150 psi, and shall be completely factory assembled, including a pressure regulator properly adjusted for
operation on ___________ gas with stainless steel burners. Controls will be arranged for safety shutoff
in event of pilot failure. Water heater(s) with inputs less than 360,000 Btu/hr. shall have top, front and
rear side inlet/outlet water connections. Water heater(s) shall be covered by a three year limited
warranty against tank leaks.

Water heater(s) shall be constructed in accordance with the requirements of the ASME Boiler and
Pressure Vessel Code, Section IV Part HLW.

This product features a three year limited warranty against tank leaks. Please refer to Commercial
Warranty Information brochure for complete warranty information.

Rheem Water Heating • 101 Bell Road, Montgomery, Alabama 36117-4305 • www.rheem.com
Rheem Canada Ltd./Ltée,128 Barton Street West, Hamilton, Ontario L8N 3P3

P R I N T E D   I N   U . S . A

0 5 / 0 6   W P

F O R M   N O . R R 1 0 2 C - 1   R e v. 1 6