Справочник Пользователя для Monessen Hearth BTU/Hr
4
49D0090
49D0090
5
IMPORTANT SAFETY INFORMATION
Continued from page 3
10. This appliance is only for use with the type of gas indicated
on the rating plate. This appliance is not convertible for
use with other gases.
use with other gases.
11. Do not place propane/LP supply tank(s) inside any struc-
ture. Locate propane/ LP supply tank(s) outdoors.
12. If you smell gas
• shut off gas supply
• do not try to light any appliance
• do not touch any electrical switch; do not use any phone
• shut off gas supply
• do not try to light any appliance
• do not touch any electrical switch; do not use any phone
in your building.
• immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions
• if you cannot reachyour gas supplier, call the fire depart-
ment
13. This heater shall not be installed in a bedroom or bath-
room.
14. This heater needs fresh, outside air ventilation to run
properly. This heater has an Oxygen Depletion Sensing
(ODS) safety shutoff system. The ODS shuts down the
heater if not enough fresh air is available. See “Air For
Combustion and Ventilation,”
(ODS) safety shutoff system. The ODS shuts down the
heater if not enough fresh air is available. See “Air For
Combustion and Ventilation,”
pages 8 through 10.
15. Before using furniture polish, wax, carpet cleaner, or
similar products, turn heater off. If heated, the vapors
from these products may create a white powder residue
within burner box or on adjacent walls or furniture.
from these products may create a white powder residue
within burner box or on adjacent walls or furniture.
16. If heater shuts off, do not relight until you provide fresh,
outside air. If heater keeps shutting off, have it serviced.
17. Do not run heater
• where flammable liquids or vapors are used or stored.
• under dusty conditions.
18. Do no t use heater if any part has been under water. Imme-
• where flammable liquids or vapors are used or stored.
• under dusty conditions.
18. Do no t use heater if any part has been under water. Imme-
diately call a qualified service technician to inspect the
room heater and to replace any part of the control system
and any gas control which has been under water.
room heater and to replace any part of the control system
and any gas control which has been under water.
19. To prevent the creation of soot, follow the instructions in
“Cleaning and Maintenance,”
page 26.
20. Turn off and unplug heater and let cool before servicing.
Only a qualified service person should service and repair
heater.
heater.
21. Operating heater above elevations of 4,500 feet could
cause pilot outage.
22. To prevent performance problems, do not use a propane/
LP fuel tank of less than 100 lbs. capacity.
23. This unit complies with ANSI Z21.11.2-2001 Unvented
Heaters.
24. Caution: Candles, incense, oil lamps, etc. produce com-
bustion byproducts including soot. Vent-free appliances
will not filter or clean soot produced by these types of
products. In addition, the smoke and/or aromatics (scents)
may be reburnt in the vent-free appliance which can pro-
duce odors. It is recommended to minimize the use of
candles, incense, etc. while the vent-free appliance is in
operation.
will not filter or clean soot produced by these types of
products. In addition, the smoke and/or aromatics (scents)
may be reburnt in the vent-free appliance which can pro-
duce odors. It is recommended to minimize the use of
candles, incense, etc. while the vent-free appliance is in
operation.
25. Unvented gas heaters emit moisture into the living area.
In most homes of average construction, this does not pose
a problem. In houses of extremely tight construction,
additional mechanical ventilation is recommended.
a problem. In houses of extremely tight construction,
additional mechanical ventilation is recommended.
26. During manufacturing, fabricating and shipping, various
components of this appliance are treated with certain
oils, films or bonding agents. These chemicals are not
harmful but may produce annoying smoke and smells
as they are burned off during the initial operation of the
appliance; possibly causing headaches or eye or lung
irritation. This is a normal and temporary occurrence.
oils, films or bonding agents. These chemicals are not
harmful but may produce annoying smoke and smells
as they are burned off during the initial operation of the
appliance; possibly causing headaches or eye or lung
irritation. This is a normal and temporary occurrence.
The initial break-in operation should last two to three
hours with the burner at the highest setting. Provide
maximum ventilation by opening windows or doors to
allow odors to dissipate. Any odors remaining after this
initial break-in period will be slight and will disappear
with continued use.
maximum ventilation by opening windows or doors to
allow odors to dissipate. Any odors remaining after this
initial break-in period will be slight and will disappear
with continued use.
27. The appliance and its appliance main gas valve must be
disconnected from the gas supply piping system during
any pressure testing of that system at test pressures in
excess of 1/2 psig (3.5 kPa).
any pressure testing of that system at test pressures in
excess of 1/2 psig (3.5 kPa).
28. The appliance must be isolated from the gas supply
piping system by closing its equipment shutoff valve
during any pressure testing of the gas supply piping
system at test pressures equal to or less than 1/2 psig
(3.5 kPa).
during any pressure testing of the gas supply piping
system at test pressures equal to or less than 1/2 psig
(3.5 kPa).
29. This appliance is not a zero clearance fireplace. Do not
frame this fireplace into a wall.