Листовка для American Standard T064.740
F19
© 2008 AS America Inc.
ONE™
TWO-HANDLE THERMOSTAT
WITH SEPARATE VOLUME CONTROL
FLOW RATE*
GALLONS PER MINUT
E
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
3
6
9
12
15
120
100
80
60
40
20
SUGGESTED SPECIFICATION:
Two handle Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also
feature ceramic disc valving, 1/2" NPT or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T064.740.___
(Trim Kit) and R520 or R540 (Rough Valve).
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASSE 1016
ASME A112.18.1
CSA B125
PRODUCT FEATURES:
Brass Casting:
Highest quality faucet material for durability &
long life.
Wax Thermostatic Unit:
Permits shuttle valve to move
between the hot and cold seat to maintain the pre-selected
constant water temperature.
Back to Back Capable:
Hot and cold can be reversed.
Spring-Loaded Check Valves:
When the hot and cold water
enters the fitting, both supplies pass through the spring-loaded
check valves to prevent cross flow of hot and cold water.
Integrated Stop Valves:
Ensure easy cleaning and servicing.
Adjustable Hot Limit Safety Stop:
Limits the amount of hot
water allowed to mix with cold. Reduces the risk of accidental
scalding. Maximum water temperature limit may be reduced to
104 or 109 degrees Fahrenheit.
MODEL NUMBER:
TRIM KITS:
T064.740 Two-Handle Thermostat Trim Kit
T064.740 Two-Handle Thermostat Trim Kit
With separate volume control. L
ESS Valve.
ROUGH VALVES:
R520 Rough Valve Body only
R520 Rough Valve Body only
1/2" NPT inlets/outlets. With separate volume control.
L
ESS Trim.
R540 Rough Valve Body only
3/4" NPT inlets/outlets. With separate volume control.
L
ESS Trim.
NOTE:
• When used as a Bath/Shower:
EITHER
- a separate diverter valve (such as R420 or R430)
OR
- a diverter tub spout (requires twin ell - Model #8888.120)
IS REQUIRED
*NOTE:
When used as a Bath/Shower a separate diverter valve is required (such as1660.430 or 1660.440).
Requires twin ell ( Model #8888.120 - must be ordered separately) for use with diverter spouts.
186mm
(7-3/8)
100mm
(3-7/8)
200mm
(7-7/8)
48mm to 68mm
(2 to 2-5/8)
150mm
(6)
Two-handle Thermostat Trim Kit with separate volume control.
R540
Rough Valve Body less trim - 3/4" NPT Inlets/Outlets
R520
Rough Valve Body less trim - 1/2" NPT Inlets/Outlets
GENERAL DESCRIPTION:
Cast brass valve body. The single unit contains two
handles, the bottom lever handle sets the desired
temperature and the top lever handle functions as an
on/off, volume control. The temperature is maintained by
a wax element moving a shuttle valve between hot and
cold. The volume is controlled by twin ceramic disc valve
cartridges. Ceratherm includes Hot Limit Safety Stop.
Maximum temperature limit is 112°F. Escutcheon plate is
stamped brass.
Available with 1/2" or 3/4" NPT inlets
and outlets. The valve has a high flow rate, ideal for
mutiple outlet installations.
NOTE: FITTING
MUST BE INSTALLED
WITH VOLUME CONTROL
ON TOP.
R520
1/2" NPT INLETS
or
R540
3/4" NPT INLETS
**
ROUGH & TRIM MUST BE ORDERED SEPARATELY.
T064.740
*
Finish Options
Product
Number
Number
Description
Polished
Chrome
002
PVD
Satin
Nickel
295
TRIM KITS**
Product
Number
Number
Description
ROUGH VALVE
BODIES
25mm
(1)
FINISHED
WALL
160mm
(6-1/4)
Meets the American Disabilities Act Guidelines
and
ANSI A117.1 Requirements for the
physically challenged.