Справочник Пользователя для Desa VFRMV18NB

www.desatech.com

116412-01B

Ventilation Air From Outdoors

Provide extra fresh air by using ventilation grills or

ducts. You must provide two permanent openings:

one within 12" of the ceiling and one within 12"

of the floor. Connect these items directly to the

outdoors or spaces open to the outdoors. These

spaces include attics and crawl spaces. Follow the

National Fuel Gas Code, ANSI Z223.1/NFPA 54,

Section 5.3, Air for Combustion and Ventilation for

required size of ventilation grills or ducts.
IMPORTANT:

Do not provide openings for inlet

or outlet air into attic if attic has a thermostat-

controlled power vent. Heated air entering the attic

will activate the power vent.

AIR FOR COMBUSTION

AND VENTILATION

Continued

Figure 3 - Ventilation Air from Outdoors

Figure 2 - Ventilation Air from Inside

Building

Outlet

Air

Ventilated

Attic

Outlet

Air

Inlet

Air

Inlet Air

Ventilated

Crawl Space

Crawl

Space

To Attic

Remove

Door into
Adjoining

Room,
Option

Ventilation Grills

Into Adjoining Room,

Option 2

Ventilation

Grills

Into Adjoining

Room,

Option 1

12"

INSTALLATION

NOTICE: This heater is intended

for use as supplemental heat.

Use this heater along with your

primary heating system. Do not

install this heater as your primary

heating source. If you have a

central heating system, you may

run system's circulating blower

while using heater. This will help

circulate the heat throughout the

house. In event of a power out-

age, you can use this heater as

your primary heat source.

WARNING: A qualified ser-

vice person must install heater.

Follow all local codes.

NOTICE: State or local codes may

only allow operation of this appli-

ance in a vented configuration.

Check your state or local codes.

WARNING: Make sure the

selector switch is in the OFF po-

sition before installing heater.

WARNING: Before installing

in a solid fuel burning fireplace,

the chimney flue and firebox

must be cleaned of soot, creo-

sote, ashes and loose paint by a

qualified chimney cleaner. Creo-

sote will ignite if highly heated. A

dirty chimney flue may create and

distribute soot within the house.

Inspect chimney flue for damage.

If damaged, repair flue damper

before operating appliance.