Справочник Пользователя для Brother V64
26
KNOWING YOUR SEWING MACHINE ———————————————————————————————————————————————————————————————————————————————————
d
Fully lower the needle threader lever.
X
The end of the needle threader rotates
toward you and the hook passes
through the eye of the needle.
toward you and the hook passes
through the eye of the needle.
e
Catch the thread on the hook as shown below.
a Hook
b Thread
b Thread
f
While lightly holding the thread, release the
needle threader lever. The hook will pull the
thread through the needle.
needle threader lever. The hook will pull the
thread through the needle.
g
Pull the loop of the thread passed through the
eye of the needle toward the rear of the
machine.
eye of the needle toward the rear of the
machine.
a Loop of thread
h
Raise the presser foot lever.
a Presser foot lever
i
Pass the end of the thread through the presser
foot, and then pull out about 5 cm (2 inches)
of thread toward the rear of the machine.
foot, and then pull out about 5 cm (2 inches)
of thread toward the rear of the machine.
a 5 cm (2 inches)
Note
● If you incorrectly feed the thread you may
cause sewing problems.
● Be careful not to pull on the thread with force
or it may bend the needle.
● If the thread does not pass through the eye of
the needle, start from step
c
again.
CAUTION