Справочник Пользователя для Brother XL-2620i
SEWING BUTTONHOLES AND BUTTONS ———————————————————————————————————————
36
4
If the left side is too open or tight compared
with the right side, adjust the buttonhole fine-
adjustment screw as described below.
If the left side is too open, turn the buttonhole
fine-adjustment screw with a large screwdriver
in the
with the right side, adjust the buttonhole fine-
adjustment screw as described below.
If the left side is too open, turn the buttonhole
fine-adjustment screw with a large screwdriver
in the
–
direction.
If the left side is too tight, turn the buttonhole
fine-adjustment screw with a large screwdriver
in the
fine-adjustment screw with a large screwdriver
in the
+
direction.
• This adjustment ensures both sides of the
buttonhole are the same.
1 Stitch length dial
2 Buttonhole fine-adjustment screw
3 Left side
4 Buttonhole appearance
2 Buttonhole fine-adjustment screw
3 Left side
4 Buttonhole appearance
Sewing Buttons
1
Measure the distance between the
buttonholes and mark the fabric. Then set the
pattern selection dial to the Zigzag Stitch, and
set the width you want.
buttonholes and mark the fabric. Then set the
pattern selection dial to the Zigzag Stitch, and
set the width you want.
2
Turn off the machine.
3
Change the foot to the button sewing foot.
4
Place the darning plate on the needle plate.
5
Turn on the machine.
6
Put a button between the foot and the fabric
and make sure that the needle enters the holes
without hitting the button. If it hits, see step
and make sure that the needle enters the holes
without hitting the button. If it hits, see step
1
.
7
At a slow speed, sew about 10 stitches.
8
Remove the material from the machine. Cut
the upper and lower threads and tie both
threads at the back of the material.
the upper and lower threads and tie both
threads at the back of the material.
Stitch
Name Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Foot
Other
Zigzag
Stitch
F
(1/64)
Any
Button
Sewing
Foot
Darning
Plate
3
4
4
1
2
●
Make sure the needle does not hit the
button during sewing. The needle may
break and you may be injured.
button during sewing. The needle may
break and you may be injured.
CAUTION