Справочник Пользователя для Brother OVERLOCK MACHINE

English

1. Slide the change switch <A> to the left until it is

aligned to the "L" mark on the machine.

<A>

2. Run the thread in the sequence illustrated,

following the yellow color and the numbers

next to each threading point.

Two needles

One needle

2

1

3

4

5

6

7

3

4

<B>

7

a) Pull the thread off the spool and directly up

through the thread holder 1 and the thread

holder 2 on the thread tree from back to front.

b) Hold the thread with your left and right hands,

then pass the thread through the thread guide
3

, and then pass the thread through the

tension disc 4 which is in the channel next to

the yellow tension adjustment dial.

c) Guide the thread down the channel and across

through the threading points 5 6 7 next to

the yellow color marks following the numerical

order in the accompanying illustration.

· Turn off the machine before threading for safety.
· Turn the hand wheel so that the mark on the hand wheel is aligned to the line on the machine (See

CHAPTER 1 "Turning direction of hand wheel").

1. Slide the change switch <A> to the right until it

is aligned to the "R" mark on the machine.

<A>

2. Run the thread in the sequence illustrated

below, following the green color and the

numbers next to each threading point.

2

1

3

4

5

6

7

3

4

<B>

Two needles

One needle

7

a) Pull the thread off the spool and directly up

through the thread holder 1 and the thread

holder 2 on the thread tree from back to front.

b) Hold the thread with your left and right hands,

then pass the thread through the thread guide
3

, and then pass the thread through the

tension disc 4 which is in the channel next to

the green tension adjustment dial.

c) Guide the thread down the channel and across

through the threading points 5 6 7 next to

the green color marks following the numerical

order in the accompanying illustration.