Справочник Пользователя для Brother XL-3520i
USING ATTACHMENTS AND APPLICATIONS ——————————————————————————————————————
42
Note
● When sewing with the walking foot, sew at
medium to low speeds.
Using the Quilting Foot
The Quilting Foot is useful for darning and
free-motion machine quilting.
free-motion machine quilting.
1
Turn off the machine.
2
Raise the needle and the presser foot.
3
Loosen the presser foot screw to remove the
presser foot holder.
presser foot holder.
1 Use a coin or screwdriver
2 Presser foot holder
3 Presser foot screw
2 Presser foot holder
3 Presser foot screw
4
Attach the quilting foot, making sure that part
A shown in the illustration is above the
needle clamp screw. Then lower the presser
foot lever and tighten the presser foot screw.
• Make sure that the needle clamp screw is
A shown in the illustration is above the
needle clamp screw. Then lower the presser
foot lever and tighten the presser foot screw.
• Make sure that the needle clamp screw is
firmly tightened.
1 Presser foot screw
2 Needle clamp screw
2 Needle clamp screw
5
Put the darning plate on the needle plate.
Turn on the machine.
Turn on the machine.
6
Set the pattern selection dial to the Straight
Stitch.
• Before starting to sew, draw the quilting
Stitch.
• Before starting to sew, draw the quilting
design on the fabric.
●
Use a coin or screwdriver to tighten the
screw securely. If the screw is loose, the
needle may hit the presser foot and you
may be injured.
screw securely. If the screw is loose, the
needle may hit the presser foot and you
may be injured.
●
Before you start sewing, make sure you
turn the handwheel toward you
(counterclockwise) to check that the
needle does not hit the presser foot.
turn the handwheel toward you
(counterclockwise) to check that the
needle does not hit the presser foot.
●
Be careful not to touch the needle,
otherwise you may be injured.
otherwise you may be injured.
Stitch
Name
Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Other
Straight
Stitch
Any
2.5
(3/32)
Darning
Plate
CAUTION
3
2
1
●
Be careful not to touch the needle,
otherwise you may be injured.
otherwise you may be injured.
●
Use a coin or screwdriver to tighten the
presser foot holder screw securely. If the
screw is loose, the needle may hit the
presser foot and you may be injured.
presser foot holder screw securely. If the
screw is loose, the needle may hit the
presser foot and you may be injured.
●
Before you start sewing, make sure you
turn the handwheel toward you
(counterclockwise) to check that the
needle does not hit the presser foot.
turn the handwheel toward you
(counterclockwise) to check that the
needle does not hit the presser foot.
A
1
2
CAUTION