Инструкции Пользователя для Brother NX 600
Cover C
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Needle and presser foot
section
section
a Buttonhole lever
Lower the buttonhole lever when sewing buttonholes
and bar tacks.
and bar tacks.
b Thread guide discs
Pass the thread through the thread guide discs when
using the needle threader to thread the needle.
using the needle threader to thread the needle.
c Needle bar thread hook
Pass the upper thread through the needle bar thread
hook.
hook.
d Needle plate
The needle plate is marked with guides for sewing
straight seams.
straight seams.
e Bobbin cover/Shuttle
Remove the bobbin cover, and then insert the bobbin
into the shuttle.
into the shuttle.
f Feed dogs
The feed dogs feed the fabric in the sewing direction.
g Presser foot
The presser foot applies pressure consistently on the
fabric as the sewing takes place. Attach the appropriate
presser foot for the selected stitching.
fabric as the sewing takes place. Attach the appropriate
presser foot for the selected stitching.
h Presser foot holder
The presser foot is installed onto the presser foot holder.
Right-side/rear view
a Presser foot dial
Use the presser foot dial to adjust the amount of
pressure that the presser foot applies to the fabric.
pressure that the presser foot applies to the fabric.
b Handle
Carry the sewing machine by its handle when
transporting the machine.
transporting the machine.
c Balance wheel
Turn the balance wheel toward you to raise and lower
the needle to sew one stitch.
the needle to sew one stitch.
d Air vent
The air vent allows the air surrounding the motor to be
exchanged. Do not cover the air vent while the sewing
machine is being used.
exchanged. Do not cover the air vent while the sewing
machine is being used.
e Main power switch
Use the main power switch to turn the sewing machine
on and off.
on and off.
f Foot controller jack
Insert the plug on the end of the foot controller cable
into the foot controller jack.
into the foot controller jack.
g Power supply jack
Insert the plug on the power supply cord into the power
supply jack.
supply jack.
h Feed dog position switch
Use the feed dog position switch to lower the feed dogs.
Memo
learning to use your machine.
1
2
3
4
5
6
7
8
2
3
5
6
4
7
8
1