Справочник Пользователя для Brother STAR 120E
24
KNOWING YOUR SEWING MACHINE
CONOZCA SU MÁQUINA DE COSER
Model
PS-2500, PS-2400, PS-2300
STAR140E, STAR130E, STAR120E
STAR140E, STAR130E, STAR120E
4. Slide the speed range control lever to its maxi-
mum (as far to the right as possible).
5. Push the “START/STOP” button. The machine
will stop automatically when the bobbin is full.
6. After the bobbin has stopped moving, push the
“START/STOP” button to stop the machine.
7. Cut the thread, slide the bobbin winder shaft to the
left and remove the bobbin.
(Model PS-2200, STAR110)
4. Step down on the foot controller to start sewing.
5. After the machine stops automatically when the
4. Step down on the foot controller to start sewing.
5. After the machine stops automatically when the
bobbin is full, take your foot off of the foot control-
ler.
ler.
6. Cut the thread, slide the bobbin winder shaft to the
left and remove the bobbin.
NOTE:
Immediately after winding the bobbin, it is normal to
hear the sound of the clutch engaging when begin-
ning to sew or manually turning the balance wheel.
Immediately after winding the bobbin, it is normal to
hear the sound of the clutch engaging when begin-
ning to sew or manually turning the balance wheel.
CAUTION
Be sure to use the specified bobbin.
Replacement part code
Be sure to use the specified bobbin.
Replacement part code
XA3811-051 (For U.S.A)
XA3812-052 (For other countries)
XA3812-052 (For other countries)
Using a different bobbin may result in injuries or
damage.
damage.
Modelos PS-2500, PS-2400, PS-2300,
STAR 140E, STAR 130E y STAR 120E
4. Deslice la palanca del control de velocidad hacia
la derecha y a fondo (velocidad máxima).
5. Presione el pulsador de puesta en marcha/parada.
La máquina se parará automáticamente cuando
la canilla esté llena.
la canilla esté llena.
6. Cuando la canilla se haya detenido, presione el
pulsador de puesta en marcha/parada para
desconectar la máquina.
desconectar la máquina.
7. Corte el hilo, deslice el eje de hacer canilla hacia
la izquierda y retire la canilla.
(Modelos PS-2200 y STAR110)
4. Pise el pedal para comenzar a coser.
5. Cuando la máquina se detenga automáticamente
5. Cuando la máquina se detenga automáticamente
porque la canilla está llena, retire el pie del pedal.
6. Corte el hilo, deslice el eje de hacer canilla hacia
la izquierda y retire la canilla.
NOTA:
Inmediatamente después de bobinar la canilla, si
empieza a coser o gira la polea, normalmente oirá el
sonido del encaje del embrague.
Inmediatamente después de bobinar la canilla, si
empieza a coser o gira la polea, normalmente oirá el
sonido del encaje del embrague.
PRECAUCIÓN
Asegúrese de que utiliza la canilla especificada.
Código de la pieza de recambio
Asegúrese de que utiliza la canilla especificada.
Código de la pieza de recambio
XA3811-051 (para EE UU)
XA3812-052 (para los demás países)
XA3812-052 (para los demás países)
Utilizar una canilla diferente puede provocar lesiones
o averías.
o averías.