Справочник Пользователя для Brother XE5427-001
20
GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
b
Slide the embroidery unit onto the machine
arm.
Push it in until it clicks and stops.
arm.
Push it in until it clicks and stops.
X
The embroidery unit is attached.
Note
z Make sure that there is no gap between the
embroidery unit and the machine, otherwise
the embroidery pattern may not be sewn
correctly.
Be sure to fully insert the connector into the
connection port.
the embroidery pattern may not be sewn
correctly.
Be sure to fully insert the connector into the
connection port.
z Do not push on the carriage when attaching
the embroidery unit to the machine,
otherwise damage to the embroidery unit
may result.
otherwise damage to the embroidery unit
may result.
c
Turn on the machine.
X
The confirmation message is displayed.
d
Be sure that no objects or hands are near the
embroidery unit and press
embroidery unit and press
.
X
The carriage moves to its initial position.
a Carriage
CAUTION
Note
z If the machine is initialized with hands or
objects near the carriage, the screen may
return to the initial display. After removing
whatever is near the carriage, turn the power
on again.
return to the initial display. After removing
whatever is near the carriage, turn the power
on again.
X
The screen for selecting the embroidery
pattern type is displayed.
pattern type is displayed.
Memo
z For details on the embroidery patterns, refer
to "Selecting Embroidery Patterns" (page 50).
● Do not put your hands or other objects
near the carriage. It may cause injury.
a
0711-0120-C-combo_E.book Page 20 Thursday, July 24, 2008 1:46 PM