Справочник Пользователя для Brother computerized embroidery and sewing machine

Скачать
Страница из 204
148
EMBROIDERY
 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
Attaching the Embroidery Frame
This section describes how to attach the embroidery frame.
Attaching the embroidery frame
a
Wind the embroidery bobbin thread onto the 
bobbin and set it into the bobbin case.
• For details, refer to "Winding/Installing the 
Bobbin" (page 22).
b
Raise the presser foot lever. 
a Presser foot lever
c
Press 
(Needle position button) once or 
twice to raise the needle.
a Needle position button
d
Pass the embroidery frame under the presser 
foot while raising the presser foot lever even 
further.
CAUTION
e
Firmly insert the embroidery frame guide into 
the embroidery carriage frame holder from the 
top.
Line up the embroidery frame guide tabs and 
the embroidery carriage frame holder slots and 
push in until it clicks and stops.
a Embroidery frame guide tabs
b Embroidery carriage frame holder slots
X
The embroidery unit is attached.
Note
z Be sure to insert both pins. If only the 
forward or the back pin is inserted, the 
pattern may not turn out correctly.
CAUTION
● Do not touch the start/stop button, 
needle position button or reverse/
reinforcement stitch button. If one of the 
buttons is accidentally pressed, the 
machine will begin sewing and your 
finger may be pricked with the needle or 
the needle may break.
a
a
● Correctly set the embroidery frame into 
the embroidery frame holder. Otherwise, 
the presser foot may hit the embroidery 
frame, resulting in injury.
a
b