Справочник Пользователя для Brother Sewing Machines
Care and Maintenance 127
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4
h
Insert the bobbin case so that the projection
on the bobbin case aligns with the spring.
on the bobbin case aligns with the spring.
a Projection
b Spring
b Spring
i
Insert the tabs on the needle plate cover into
the needle plate, and then slide the cover back
on.
the needle plate, and then slide the cover back
on.
a Needle plate cover
j
Install the flat bed attachment in its original
position.
position.
CAUTION
Removing the needle plate
When the thread is tangled and cannot be removed
by cleaning the race, remove the needle plate.
by cleaning the race, remove the needle plate.
a
Follow steps
a
through
f
on page 126.
b
Remove the needle plate by removing the
screws with the included screwdriver.
screws with the included screwdriver.
c
Remove the tangled thread from the needle
plate.
plate.
d
Return the needle plate to its original position,
and then tighten the screws with the included
screwdriver.
and then tighten the screws with the included
screwdriver.
Note
z Align the two screw holes on the needle
plate with the two holes on the machine.
e
Follow steps
g
through
j
(page 126-127).
● Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new
bobbin case (part code: XC3153-151),
contact your nearest authorized service
center.
tangled, the needle may break or sewing
performance may suffer. For a new
bobbin case (part code: XC3153-151),
contact your nearest authorized service
center.
● Be sure that the bobbin case is correctly
installed, otherwise the needle may break.
a
b
b
a
a