Краткое Руководство По Установке для Brother Computerized Embroidery Sewing Machine

UTILITY STITCHES

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Free-motion quilting

With free-motion quilting, the feed dogs can be
lowered (using the drop feed lever) so that the fabric
can be moved freely in any direction.
When using free-motion quilting, use the optional
quilting foot or the embroidery foot "Q".

Remove the presser foot and the presser foot
holder.

• Refer to "Removing the presser foot holder"

(page 40).

Secure the quilting foot with the presser foot
folder screw.
The pin on the quilting foot should be
positioned over the needle clamp screw.

a Pin on quilting foot
b Presser foot holder screw
c Needle clamp screw

Hold the quilting foot in place with your right
hand, and then tighten the presser foot holder
screw using the screwdriver in your left hand.

a Presser foot holder screw

CAUTION

Slide the drop feed lever, located at the rear of
the machine on the base, to

(to the left as

seen from the rear of the machine).

a Feed dog position switch (as seen from the rear of

the machine)

The feed dogs are lowered.

Turn on the sewing machine, and then select a
stitch.

• For details, refer to "Selecting stitching" (page

45).

Use both hands to hold the fabric taut, and
then move the fabric to follow the pattern.
Reinforcement stitches are sewn at the
beginning and end of sewing.

a Pattern

After sewing is finished, slide the drop feed
lever to

(to the right as seen from the rear

of the machine) to raise the feed dogs.

• Normally, the drop feed lever is positioned at

the right.

● Be sure to securely tighten the screws

with the screwdriver, otherwise the
needle may touch the presser foot,
causing it to bend or break.