Краткое Руководство По Установке для Brother Computerized Embroidery Sewing Machine
SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
58
d
Set the fabric in place, and press
(Start/
stop button) once.
X
Stitching starts after reverse stitching or
reinforcement stitching.
reinforcement stitching.
e
Once you have reached the end of the
stitching, press
stitching, press
(Reverse/reinforcement
stitch button) once.
If stitching, such as buttonholes and bar
tacking, that includes reinforcement stitching
has been selected, this operation is
unnecessary.
If stitching, such as buttonholes and bar
tacking, that includes reinforcement stitching
has been selected, this operation is
unnecessary.
X
After the reverse stitching or reinforcement
stitching has been done, the sewing machine
stops, and the thread is cut.
stitching has been done, the sewing machine
stops, and the thread is cut.
Memo
z Programmed thread-cutting will not be
performed if the start/stop button is pressed
while sewing. Press the reverse/
reinforcement stitch button at the end of the
stitching.
while sewing. Press the reverse/
reinforcement stitch button at the end of the
stitching.
z If the power is turned off, programmed
thread-cutting will be turned off.
Mirroring stitches
You can sew the mirror image of a stitch horizontally
(left and right).
(left and right).
a
Turn on the sewing machine.
X
The LCD comes on.
b
Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 45).
c
Press
on the LCD.
X
It turns to
, and the pattern is mirrored.
• To turn the mirrored stitching off, press
.
Memo
z Mirroring is not possible for buttonholes and
other stitches where
shows.
z When the sewing machine is turned off, the
mirroring setting is cancelled.
1
The thread is cut here.