Справочник Пользователя для Brother BE-438B

5. ADJUSTMENT 

 

[KE-484C] 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

3464Q 

Approx. 
38mm 

3216Q

Needle point 

3466Q

3465Q

1.  While the sewing machine is stopped, loosen the set screw (3) and move the thread wiper arm assembly (4) 

up or down to adjust so that the clearance between the tip of the needle and the top of the wiper is 2 ± 0.5 
mm when the thread wiper connecting rod lever (1) is pushed up and the thread wiper (2) has passed below 
the needle. 

*  This adjustment should be made while the sewing machine is stopped. Be careful not to turn the machine 

pulley, otherwise the tip of the needle will move. 

2.  Loosen the two bolts (5) and move the cylinder cover (6) up or down so that the thread wiper is 

approximately 38 mm from the needle when it is at the standby position. 

 
 

KE-430B, 430C series