Справочник Пользователя для Brother GETTING READY SEWING BASICS UTILITY STITCHES
9
Needle and presser foot section
a Needle threader lever
Use the needle threader to thread the needle.
b Buttonhole lever
Lower the buttonhole lever when sewing buttonholes
and bar tacks.
and bar tacks.
c Presser foot holder
The presser foot is attached to the presser foot holder.
d Presser foot holder screw
Use the presser foot holder screw to hold the presser
foot holder in place.
foot holder in place.
e Presser foot
The presser foot applies pressure to the fabric during
sewing. Attach the appropriate presser foot for the
selected stitch.
sewing. Attach the appropriate presser foot for the
selected stitch.
f Needle plate cover
Remove the needle plate cover to clean the bobbin case
and race.
and race.
g Feed dogs
The feed dogs feed the fabric.
h Quick-set bobbin
Begin sewing without pulling up the bobbin thread.
i Bobbin cover
Remove the bobbin cover and then insert the bobbin
into the bobbin case.
into the bobbin case.
j Needle plate
The needle plate is marked with guides to help sew
straight seams.
straight seams.
k Needle bar thread guide
Pass the upper thread through the needle bar thread
guide.
guide.
l Presser foot lever
Raise and lower this lever to raise and lower the presser
foot.
foot.
m Needle clamp screw
Use the needle clamp screw to hold the needle in place.