Справочник Пользователя для Brother 435C

8. ELECTRIC MECHANISM

８

-８-１. Light work clamp

For pneumatic specifications, the hose connections can be changed so that the work clamp are made to lower

gently when the work clamp pedal is depressed to the 1st step, and firmly when the work clamp pedal is

depressed to the 2nd step. This makes it easier to carry out position matching when attaching small articles

such as labels.
[Memory switch setting]

Set memo-42 (memo-3b: KE-436B, 436C) to 5 for two-pedal mode so that the work clamps lower in the order

of left then right for the standard hose connection. (Refer to “8-6./8-7. Explanation of the memory switches”.)
Hose connections for light work clamp operation by both pressers

Plug

Branch

0344Q

[How to use]
1. Depress the work clamp pedal to the 1st step to lower the work clamps and apply a light pressure. You can

then position small articles such as labels at this time.

2. After checking that everything is positioned correctly, depress the work clamp pedal to the 2nd step to firmly

clamp the article being sewn.

3. Press the start pedal to start sewing.

Other hose connections and corresponding operations

The hoses can be connected in combinations other than the one shown above so that only one side of the

work clamp operates in light work clamp mode.

Cylinder connectors

Branch and plug

connectors

A B C D

Operation when presser pedal is depressed to the 1st step

Branch: 1B, 2A

Plug: 1A, 2B

1B 2A 1B 2A

Both pressers operate in light work clamp mode
(example shown above)

Branch: 1B

Plug: 2B

1B 2A 1B 1A

Only left presser lowers, and it lowers in light work clamp
mode

Branch: 1B

Plug: 2B

1B 1A 1B 2A

Only right presser lowers, and it lowers in light work clamp
mode

Branch: 2A

Plug: 1A

1B 2A 2B 2A

Both pressers lower, but only left presser lowers in light work
clamp mode

Branch: 2A

Plug: 1A

2B 2A 1B 2A

Both pressers lower, but only right presser lowers in light work
clamp mode

KE-430B, 430C series

160