Краткое Руководство По Установке для Brother 885V97
132
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Entering the pattern data
Follow the pattern drawn on the grid sheet and
program the pattern into the sewing machine.
program the pattern into the sewing machine.
a
Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 43).
b
Press
(Utility stitch key) on the
operation panel, and select
.
c
Check the grid sheet set, and specify the
coordinates of the first point.
Specify the coordinates using
coordinates of the first point.
Specify the coordinates using
, and
then press
.
d
Specify whether single stitching or triple
stitching will be sewn between the points.
stitching will be sewn between the points.
is single stitching, and
gives
triple stitching.
e
Specify the coordinates of the second point,
and then press
and then press
.
f
Repeat steps
d
through
e
to specify each point.
• If you make a mistake entering a point, press
, and the previous point is erased.
Memo
z If you want to edit the pattern, press
.
You can insert, delete and move points if
you have entered at least two points.
For details, refer to "Editing the pattern data"
(page 133).
you have entered at least two points.
For details, refer to "Editing the pattern data"
(page 133).
g
g
After all points have been entered, press
.
X
The embroidery screen appears.
h
Specify the various stitching settings, such as
reverse/reinforcement stitching, in the same
way as with other stitches.
reverse/reinforcement stitching, in the same
way as with other stitches.
• To revise the pattern, press
.
Memo
z The pattern you entered can be saved for
later use. For details, refer to "Saving
patterns" (page 129).