Инструкции Пользователя для Brother 855-X06

—

Turn off the machine.

Raise the presser foot lever.

1 Presser foot lever

Raise the needle by turning the
handwheel toward you
(counterclockwise) so that the mark on
the wheel points up.

• If the needle is not correctly raised, the

sewing machine can not be threaded.

1 Mark on the wheel

Pull up the spool pin and put a spool of
thread on this pin.

CAUTION

While holding the thread from the spool
with your right hand, pass the thread
toward you, in the groove on the thread
guide.

• Make sure that the spring in the groove

catches the thread.

1 Spring

Feed the upper thread as shown in the
following illustration.

Make sure you guide the thread through
the thread take-up lever from right to left
as shown in the following illustration.

1 Thread take-up lever

Memo

● If the thread take-up lever is lowered, the

upper thread can not be wrapped around
the thread take-up lever. Make sure you
raise the needle by turning the handwheel
toward you (counterclockwise) so that the
mark on the wheel points up.

●

If the spool of thread is in the wrong
place, or is set incorrectly, the thread
may tangle on the spool pin and cause
the needle to break.