Справочник Пользователя для Brother 882-W01

2

a Buttonhole lever

The buttonhole lever is used with the one-step buttonhole foot 
to create buttonholes. (page 121)

b Presser foot holder

The presser foot is attached to the presser foot holder. 
(page 54)

c Presser foot holder screw

Use the presser foot holder screw to hold the presser foot in 
place. (page 55)

d Presser foot

The presser foot consistently applies pressure to the fabric as 
sewing takes place. Attach the appropriate presser foot for the 
selected stitch. (page 54)

e Feed dogs

The feed dogs feed the fabric in the sewing direction.

f Bobbin cover

Open the bobbin cover to set the bobbin. (page 43, 92)

g Needle plate cover

Remove the needle plate cover to clean the race. (page 86, 
213)

h Needle plate

The needle plate is marked with guides to help sew straight 
seams. (page 85)

i Needle bar thread guide

Pass the upper thread through the needle bar thread guide. 
(page 46)

j Needle clamp screw

Use the needle clamp screw to hold the needle in place. 
(page 55)

The measurements on the bobbin cover are 
references for patterns with a middle (center) 
needle position. The measurements on the needle 
plate and the needle plate cover are references for 
stitches with a left needle position.

a For stitches with a middle (center) needle position
b For stitches with a left needle position
c Left needle position on the needle plate <inch>
d Left needle position on the needle plate <cm>
e Middle (center) needle position on the bobbin cover 

f Left needle position on the needle plate cover <inch>