Справочник Пользователя для Brother 882-W01

CONFIRMING THE PATTERN POSITION

206

CONFIRMING THE PATTERN POSITION

The pattern is normally positioned in the center of the embroidery frame. If the pattern needs to be

repositioned for better placement on the garment, you can check the layout before starting embroidery.

Using the Built-In Camera to
Align the Embroidering Position

The embroidering position can easily be aligned
using the machine’s built-in camera and the
included embroidery positioning sticker.

Affix the embroidery positioning sticker to
the location in the fabric to be
embroidered. Place the embroidery
positioning sticker so that the center of the
larger circle is at the center of the
embroidery pattern.

a Embroidery positioning sticker
b Center of the embroidery pattern
c Embroidery field

Note

• When embroidery frame (small) is installed,

the built-in camera cannot be used to align
the embroidering position. Install embroidery
frame (medium) or a larger embroidery
frame.

Note

• When inserting the fabric in the embroidery

frame, check that the embroidery pattern fits
within the embroidery field for the frame that
is used.

a Embroidery field
b Embroidery pattern
c Embroidery positioning sticker

• Depending on the type of fabric that is used,

a part of the embroidery positioning sticker
may remain attached when it is peeled off.
Before using the embroidery positioning
sticker, check that it can be cleanly removed
from a scrap piece of the fabric to be used.