Справочник Пользователя для Kenmore 385.16765
42
y
p
o
c
1
4
3
2
5
3
4
1
4
2
5
3
1
1
9
0
5
3
4
2
3
4
5
(5/8˝)
(2.2cm)
3
1
2
1/8˝
(0.4 cm)
1
5
4
3
2
Zipper Sewing
Stitch selector:
5
Stitch width:
5
Stitch length:
2
Needle thread tension:
2 to 6
Presser foot E:
Zipper foot
1
4
3
2
• To snap on the zipper foot
Groove
Pin
To sew left side
To sew right side
Pin
To sew left side
To sew right side
Fit the pin on the zipper foot into the groove on the foot
holder.
* To sew the left side of the zipper, attach zipper foot on
holder.
* To sew the left side of the zipper, attach zipper foot on
the right-hand side of pin.
* To sew the right side of zipper, attach the zipper foot on
the left-hand side of pin.
2
• Fabric preparation
Right (top) side of fabric
Wrong (bottom) side of fabric
Bottom seam
Zipper bottom stop position
Basting stitch
Wrong (bottom) side of fabric
Bottom seam
Zipper bottom stop position
Basting stitch
Place the right (top) sides of the fabric together. Sew a
bottom seam 5/8˝ (2.2 cm) from the right edge to the
estimated zipper bottom stop position . Sew in reverse
a few stitches to lock.
Increase the stitch length to 4, set needle thread tension
to 0, and sew basting stitch the entire length of the
zipper sewing.
bottom seam 5/8˝ (2.2 cm) from the right edge to the
estimated zipper bottom stop position . Sew in reverse
a few stitches to lock.
Increase the stitch length to 4, set needle thread tension
to 0, and sew basting stitch the entire length of the
zipper sewing.
1
1
1
3
3
4
4
5
5
• To sew
1/8˝ (0.4cm) fabric margin
Zipper teeth
Zipper tape
Zipper teeth
Zipper tape
Attach zipper foot on rightside of pin.
Fold back the upper layer seam allowance. Fold back
the lower layer seam allowance to leave a 1/8˝ (0.4 cm)
margin of fabric .
Place zipper teeth next to margin edge and pin margin to
zipper tape.
Align zipper foot with margin edge. Return thread tension
and stitch length to original settings. Sew a seam the
entire length of zipper tape, removing pins as you go.
Before reaching pull-tab, stop the machine with needle in
the fabric and raise the foot, then unzip a few inches to
clear a path for the stitch.
Remove fabric and close zipper.
Fold back the upper layer seam allowance. Fold back
the lower layer seam allowance to leave a 1/8˝ (0.4 cm)
margin of fabric .
Place zipper teeth next to margin edge and pin margin to
zipper tape.
Align zipper foot with margin edge. Return thread tension
and stitch length to original settings. Sew a seam the
entire length of zipper tape, removing pins as you go.
Before reaching pull-tab, stop the machine with needle in
the fabric and raise the foot, then unzip a few inches to
clear a path for the stitch.
Remove fabric and close zipper.
1
3
2
1
1