Справочник Пользователя для Samson R21
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
8000 Hz
0º
0
5
10
15
20
180º
315º
270º
90º
45º
235º
135º
dB
R21 Polar Pattern
R21 Specifications
Type
Dynamic
Frequency Response
80 Hz - 12 kHz
Polar Pattern
Cardioid
Output Impedance
Rated at 500
Ω
Sensitivity
-53 dBV/pa (1.8 mv/pa)
Connector
3-pin gold plated balanced XLR male
Dimensions
Head length
2.125 in. / 53.97 mm
Main unit length
4.56 in. / 115.88 mm
Total length
6.85 in. / 169.8 mm
Weight
7 oz. / 217 g
In contrast, directional cardioid mics are specifically designed to accept mostly
signal coming from directly in front, and to reject signal coming from behind or
from the side. The cardioid pattern is utilized by the R21 (as shown in the illustra-
tion below). For this reason, the R21 excels in environments where there is a
good deal of unwanted ambient sound—it delivers those signals originating
directly in front of the mic capsule itself while rejecting those that originate from
behind.
signal coming from directly in front, and to reject signal coming from behind or
from the side. The cardioid pattern is utilized by the R21 (as shown in the illustra-
tion below). For this reason, the R21 excels in environments where there is a
good deal of unwanted ambient sound—it delivers those signals originating
directly in front of the mic capsule itself while rejecting those that originate from
behind.
The polar pattern also determines how prone a particular mic is to inducing feed-
back. Feedback is that characteristic nasty howling sound that occurs when a mic
is placed too close to a loudspeaker—the signal from the loudspeaker is fed into
the mic, then into the loudspeaker, then into the mic, over and over again until an
oscillating tone is generated. Because the cardioid pattern utilized by the R21 is
so good at rejecting signal not coming from directly in front of the mic, you’ll find
that use of the R21 greatly minimizes feedback problems.
back. Feedback is that characteristic nasty howling sound that occurs when a mic
is placed too close to a loudspeaker—the signal from the loudspeaker is fed into
the mic, then into the loudspeaker, then into the mic, over and over again until an
oscillating tone is generated. Because the cardioid pattern utilized by the R21 is
so good at rejecting signal not coming from directly in front of the mic, you’ll find
that use of the R21 greatly minimizes feedback problems.
Samson Technologies Corp. • 575 Underhill Blvd. • P.O. Box 9031 • Syosset, NY 11791-9031
Phone: 1-800-3-SAMSON (1-800-372-6766) • Fax: 516-364-3888
service@samsontech.com • www.samsontech.com