Справочник Пользователя для RCA 2130
13
4. When finished, press the HANG UP button to end the conversation.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only
the approved Nickel-metal Hydride battery (Ni-MH), which is
compatible with this unit.
the approved Nickel-metal Hydride battery (Ni-MH), which is
compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before yo u replace
the battery.
2. Remove the battery compartment door.
3. Disconnect the cord attached to the battery pack and remove the
battery pack from the handset.
4. Insert the new battery pack and connect the cord to the jack inside the
battery compartment.
5. Put the battery compartment door back on.
6. Place handset in the base to charge. Allow the handset battery to
properly charge (for 16 hours) prior to first use or when you install a
new battery pack. If you do not properly charge the phone, battery
performance will be compromised.
new battery pack. If you do not properly charge the phone, battery
performance will be compromised.
Battery Safety Precautions
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
•
To reduce the risk of fire or personal injury, use only the Nickel-metal
Hydride battery listed in the User
‟s Guide.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
Troubleshooting
ALWAYS check
first that:
first that:
You have followed all the steps listed in the user
manual to install and set up your telephone.
manual to install and set up your telephone.
All connectors are firmly inserted in their sockets.
Main power to the base unit is switched on at the
socket. The
Main power to the base unit is switched on at the
socket. The
handset‟s batteries are correctly and
securely installed and are not run down.