Справочник Пользователя для Viking SLAS

4.03

4.04

fIGURE 34

4.01

fIGURE 35

fIGURE 36

4.08

4.04

fIGURE 37

3.01

7.03

fIGURE 38

4.07

3.01

fIGURE 39

2.02 / 2.03

2.01

fIGURE 40

1.04

3.01

SECTION TSM 288

ISSUE

PAGE 17 OF 36

4.1.9 GEaRbOX assEMblY

• Install the rear lip-seal (4.03) into the bearing housing cover

(4.04)

• Install the bearing housing O-ring (4.02) into the bearing

housing (4.01)

• Install the bearing housing cover (4.04) and the retaining

screws (4.08)

4.1.10 fINal assEMblY

NOTE: Before re-assembling the casing refer to the seal

section for assembly instructions.
• Install the guard (7.03) onto the rear of the casing (3.01)

• Install the casing (3.01) and secure with screws (4.07)

NOTE: For the SLF
• Install the rotors (2.01) and rotor retainer O-ring (2.03) and

secure with rotor retainers (2.02) (See section 6.2 for torque

settings)

• Install the head studs (1.04) into the casing (3.01)