Справочник Пользователя для TANDBERG D5016402
Getting Started
TANDBERG Director Videoconferencing System
35
Network and LAN Settings
ISDN configuration
For each installation of the system it is necessary to configure the unit. All configuration parameters
are available via the menu system. If you are using an external IMUX or special networks, the
external equipment may also need to be configured.
are available via the menu system. If you are using an external IMUX or special networks, the
external equipment may also need to be configured.
•
Press
MENU
on the IR control. Select the menu ‘T
ERMINAL
S
ETTINGS
’ > ‘N
ETWORK
’.
•
Set ‘Current Network’ to the network you want to use.
•
Specify the settings for the selected network in one of the menus.
For details, follow the instructions in ‘T
ERMINAL
S
ETTINGS
’ > ‘N
ETWORK
C
ONFIGURATION
’ in this
manual.
For further information refer to the examples in:
A
PPENDIX
1: C
ONNECTING
THE
SYSTEM
TO
ISDN
USING
NT1
NETWORK
ADAPTERS
A
PPENDIX
2: C
ONNECTING
THE
SYSTEM
TO
THE
S
WITCHED
56
NETWORK
LAN configuration
•
Press
MENU
on the remote control. Select the menu ‘Terminal Settings’ > ‘LAN Settings’.
•
Specify the necessary LAN settings according to the instructions from your LAN
administrator. If there is an H.323 Gatekeeper present on your LAN, see also ‘H.323
Settings’.
administrator. If there is an H.323 Gatekeeper present on your LAN, see also ‘H.323
Settings’.
For details, follow the instructions in chapter ‘LAN S
ETTINGS
’ in this manual.